CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement

Posted by robin
on 2012-01-16 11:03:22 UTC
On 14-Nov-2011 11:37 AM, David G. LeVine wrote:
> On 11/13/2011 02:02 AM, ebiz_59 wrote:
>> Any other thots? And what are the odds that the Xylotex drives are OK if this power supply board is only putting out like 1.5V? Should I be looking for another set of stepper drivers too?
> You might want to look at
> http://www.mpja.com/25VDC-10A-Power-Supply/productinfo/18960+PS/, MPJA
> will sell you one for $20! Of course, they have a lot of other (much
> more expensive) supplies like
> http://www.mpja.com/48V-15A-Hengfu-Power-Supply/productinfo/16510+PS/
> which, for $220, isn't cheap, but 48 Volts at 15A is not trivial.
>
> Hope this helps.
>
> Dave 8{)
>
hey

rmail
r@... if you want

advice

Discussion Thread

ebiz_59 2011-11-12 23:02:30 UTC Xylotex Pwr Sup replacement Danny Miller 2011-11-12 23:18:51 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Michael Fagan 2011-11-13 06:52:07 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement "hanermo" - CNC 6-axis Designs 2011-11-13 07:16:19 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Michael Fagan 2011-11-13 07:19:26 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement turbulatordude 2011-11-13 09:08:22 UTC Re: Xylotex Pwr Sup replacement Chuck Merja 2011-11-13 10:22:59 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 14:11:02 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Dave Halliday 2011-11-13 14:36:15 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 14:58:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 16:01:52 UTC Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 16:27:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 17:34:38 UTC Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 17:38:18 UTC Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 17:46:21 UTC Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 18:15:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Andy Wander 2011-11-13 18:37:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Dave Halliday 2011-11-13 21:07:46 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Dave Halliday 2011-11-13 21:07:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 23:48:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-14 01:02:04 UTC Re: Xylotex Pwr Sup replacement chuck 2011-11-14 01:10:50 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement turbulatordude 2011-11-14 01:16:21 UTC automation direct sure step "hanermo" - CNC 6-axis Designs 2011-11-14 01:35:15 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Andy Wander 2011-11-14 06:15:09 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Chuck Merja 2011-11-14 07:24:15 UTC RE: [CAD_CAM_EDM_DRO] automation direct sure step David G. LeVine 2011-11-14 10:37:30 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement "hanermo" - CNC 6-axis Designs 2011-11-14 11:43:34 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Danny Miller 2011-11-14 11:52:59 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement turbulatordude 2011-11-14 18:04:01 UTC mini-mill and motors Danny Miller 2011-11-14 22:31:51 UTC Re: [CAD_CAM_EDM_DRO] mini-mill and motors turbulatordude 2011-11-15 02:59:25 UTC Re: mini-mill and motors Chuck Merja 2011-11-15 22:14:44 UTC RE: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement "hanermo" - CNC 6-axis Designs 2011-11-16 00:59:33 UTC Re: [CAD_CAM_EDM_DRO] mini-mill and motors turbulatordude 2011-11-16 04:27:07 UTC Re: Xylotex Pwr Sup replacement Ron Thompson 2011-11-16 05:19:26 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Chuck Merja 2011-11-17 08:02:40 UTC RE: [CAD_CAM_EDM_DRO] Gecko G540 Ron Thompson 2011-11-17 08:43:34 UTC Re: [CAD_CAM_EDM_DRO] Gecko G540 Michael Fagan 2011-11-17 11:24:43 UTC Re: [CAD_CAM_EDM_DRO] Gecko G540 Peter Homann 2011-11-17 12:54:52 UTC Re: [CAD_CAM_EDM_DRO] Gecko G540 robin 2012-01-16 11:03:22 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement