CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement

Posted by Danny Miller
on 2011-11-14 11:52:59 UTC
Sun Sunfire V480 Server 300-1490 Hot swap Power supply 48v 24.5A
Sun V880 AC Power Supply P/N 300-1353 48v 15.6A

Either of these can be had from eBay for like $35 or less. There are
always MANY of them up on any given day.
Sun server power supply is going to be of EXCELLENT quality, and I'd say
used it as good as new for all I care.

HP seems to use 48V DC rails too. However, I was fooled by looking at
an HP "48V power supply"- it was actually the supply which turns the 48V
rail into 12V and 5v power. Glad I waited until the next day to think
about bidding on it and found a close-up of the label on it and realized
what it was. Presumably Sun has the same 48v-to-12v/5v supplies out
there too, which we don't want.

Danny

On 11/14/2011 1:43 PM, "hanermo" - CNC 6-axis Designs wrote:
> I have a 48V DC 50 amps lab/telco grade ... custom built.
> About 40 kg mass.
> I think I paid about 2500EUR ...
>
> But I used it for my telco business to feed Cisco 7513 routers and then
> it got left over.
> Runs G251s really nice ;)
>
> Smile.
>
>> <http://www.mpja.com/25VDC-10A-Power-Supply/productinfo/18960+PS/,>
>> will sell you one for $20! Of course, they have a lot of other (much
>> more expensive) supplies like
>> http://www.mpja.com/48V-15A-Hengfu-Power-Supply/productinfo/16510+PS/
>> which, for $220, isn't cheap, but 48 Volts at 15A is not trivial.
>>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
>

Discussion Thread

ebiz_59 2011-11-12 23:02:30 UTC Xylotex Pwr Sup replacement Danny Miller 2011-11-12 23:18:51 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Michael Fagan 2011-11-13 06:52:07 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement "hanermo" - CNC 6-axis Designs 2011-11-13 07:16:19 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Michael Fagan 2011-11-13 07:19:26 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement turbulatordude 2011-11-13 09:08:22 UTC Re: Xylotex Pwr Sup replacement Chuck Merja 2011-11-13 10:22:59 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 14:11:02 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Dave Halliday 2011-11-13 14:36:15 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 14:58:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 16:01:52 UTC Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 16:27:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 17:34:38 UTC Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 17:38:18 UTC Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-13 17:46:21 UTC Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 18:15:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Andy Wander 2011-11-13 18:37:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Dave Halliday 2011-11-13 21:07:46 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Dave Halliday 2011-11-13 21:07:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Danny Miller 2011-11-13 23:48:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement turbulatordude 2011-11-14 01:02:04 UTC Re: Xylotex Pwr Sup replacement chuck 2011-11-14 01:10:50 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement turbulatordude 2011-11-14 01:16:21 UTC automation direct sure step "hanermo" - CNC 6-axis Designs 2011-11-14 01:35:15 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Andy Wander 2011-11-14 06:15:09 UTC RE: [CAD_CAM_EDM_DRO] Re: Xylotex Pwr Sup replacement Chuck Merja 2011-11-14 07:24:15 UTC RE: [CAD_CAM_EDM_DRO] automation direct sure step David G. LeVine 2011-11-14 10:37:30 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement "hanermo" - CNC 6-axis Designs 2011-11-14 11:43:34 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Danny Miller 2011-11-14 11:52:59 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement turbulatordude 2011-11-14 18:04:01 UTC mini-mill and motors Danny Miller 2011-11-14 22:31:51 UTC Re: [CAD_CAM_EDM_DRO] mini-mill and motors turbulatordude 2011-11-15 02:59:25 UTC Re: mini-mill and motors Chuck Merja 2011-11-15 22:14:44 UTC RE: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement "hanermo" - CNC 6-axis Designs 2011-11-16 00:59:33 UTC Re: [CAD_CAM_EDM_DRO] mini-mill and motors turbulatordude 2011-11-16 04:27:07 UTC Re: Xylotex Pwr Sup replacement Ron Thompson 2011-11-16 05:19:26 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement Chuck Merja 2011-11-17 08:02:40 UTC RE: [CAD_CAM_EDM_DRO] Gecko G540 Ron Thompson 2011-11-17 08:43:34 UTC Re: [CAD_CAM_EDM_DRO] Gecko G540 Michael Fagan 2011-11-17 11:24:43 UTC Re: [CAD_CAM_EDM_DRO] Gecko G540 Peter Homann 2011-11-17 12:54:52 UTC Re: [CAD_CAM_EDM_DRO] Gecko G540 robin 2012-01-16 11:03:22 UTC Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement