Re: [CAD_CAM_EDM_DRO] Xylotex Pwr Sup replacement

I agree, except I would never use a 540.
The solution is good, but a packed solution with no disable per axis
cripples it.
G251 drives are a better choice.
I have 5 g251s, 5 g320s, 3 g203vs, 8 axis chinese low speed drives, 1
granite devices servo drive.

> 100% agree with Danny. My Taig ran through HobbyCNC and Xylotex drives
> before I ditched them for a G540. Best $300 I spent on the entire system.
>
> Sent from a mobile device.
>