Re: [CAD_CAM_EDM_DRO] Machineable wax problem

>
> Hello All,
> I read this group every day and it is amazing how
> erudite some of the contributors are! I have a simple
> problem that, perhaps, cannot be solved. On the other
> hand, maybe someone has a solution.
> I do a lot of jewelry prototyping in machineable
> wax
> which is then burned out of a mold and cast in
> precious
> metal. The problem is this: I spend as much time
> digging wax residue (chips) out of the final wax
> carving as I do milling the piece. If I cut plastic,
> then the milled carvings have almost no residue to dig
> out. Unfortunately, the plastic doesn't burn out as
> well as wax.
> Anybody on the group know of a material that will
> cut cleanly and burn out as well? Any other
> suggestions
> will be appreciated. I've even tried building a dam
> around the wax and cutting in water. Nothing seems to
> work!
> Bill Reidsema
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/