Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Posted by
Jon Anderson
on 2001-04-08 10:17:06 UTC
Marcus,
I'd sure be interested in this acrylic that can be burned out.
You say it burns out clean, are you referring to leaving the mold clean
or in terms of fumes. I have a hard time picturing any plastic burning
clean in terms of the latter, and would be interested if such does
exist.
Jon
I'd sure be interested in this acrylic that can be burned out.
You say it burns out clean, are you referring to leaving the mold clean
or in terms of fumes. I have a hard time picturing any plastic burning
clean in terms of the latter, and would be interested if such does
exist.
Jon
Discussion Thread
William Reidsema
2001-04-08 03:25:30 UTC
Machineable wax problem
jvicars@c...
2001-04-08 07:36:24 UTC
Re: Machineable wax problem
Larry Goldberg
2001-04-08 08:05:53 UTC
Re: Machineable wax problem
Marcus & Eva
2001-04-08 08:11:55 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
dougrasmussen@c...
2001-04-08 08:47:37 UTC
Re: Machineable wax problem
Bill Darby
2001-04-08 09:17:27 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Jon Anderson
2001-04-08 10:14:28 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Jon Anderson
2001-04-08 10:17:06 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
wanliker@a...
2001-04-08 10:28:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem
JanRwl@A...
2001-04-08 13:46:20 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
jesse
2001-04-08 13:49:36 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Jeff Demand
2001-04-08 14:39:06 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Marcus & Eva
2001-04-08 18:54:53 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Jerry Kimberlin
2001-04-08 19:02:24 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
jvicars@c...
2001-04-08 19:25:06 UTC
Re: Machineable wax problem
Jerry Kimberlin
2001-04-08 19:47:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem
jesse
2001-04-08 20:44:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem
Smoke
2001-04-08 20:52:57 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Ian Wright
2001-04-09 05:10:02 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Joe Vicars
2001-04-09 06:24:31 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Jon Anderson
2001-04-09 06:42:16 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Marcus & Eva
2001-04-09 07:16:58 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Sven Peter, TAD S.A.
2001-04-09 07:42:49 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Jon Elson
2001-04-09 11:36:44 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Ian Wright
2001-04-09 11:55:48 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Andrew Werby
2001-04-09 12:48:17 UTC
Machineable wax problem
Alan Marconett KM6VV
2001-04-09 12:50:00 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
stratton@m...
2001-04-09 12:57:17 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
jesse
2001-04-09 13:25:26 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
Dennis Cranston
2001-04-09 13:40:31 UTC
RE: [CAD_CAM_EDM_DRO] Machineable wax problem
Ian Wright
2001-04-09 14:57:55 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
R. T. Robbins
2001-04-09 20:08:52 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
jesse
2001-04-09 21:16:46 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
jesse
2001-04-09 21:21:17 UTC
Re: [CAD_CAM_EDM_DRO] Machineable wax problem
alenz@c...
2001-04-09 22:41:11 UTC
Re: Machineable wax problem