CAD CAM EDM DRO - Yahoo Group Archive

Re: Machineable wax problem

Posted by jvicars@c...
on 2001-04-08 19:25:06 UTC
Odor has nothing to do with toxicity. If you guys are trying out new
materials for burning out then spend a few minutes and pick up the
MSDS. You guys mentioned Delrin. Delrin releases formaldyhyde when
burned.
There is too much information available now online. You don't want to
end up as a Darwin Award Winner.



--- In CAD_CAM_EDM_DRO@y..., Jerry Kimberlin <kimberln@h...> wrote:
> Marcus & Eva wrote:
>
> > This acrylic is made to be burned out.
>
> > It does not create toxic fumes (it will still be a bit smelly
though, but
> > not quite as bad as wax).
>
> Isn't that an oxymoron? If you can smell it, you don't know if
> it is toxic or not. Generally, stuff that stinks is not good for
> you or your lungs. Tongue in cheek :-).......
>
> JerryK

Discussion Thread

William Reidsema 2001-04-08 03:25:30 UTC Machineable wax problem jvicars@c... 2001-04-08 07:36:24 UTC Re: Machineable wax problem Larry Goldberg 2001-04-08 08:05:53 UTC Re: Machineable wax problem Marcus & Eva 2001-04-08 08:11:55 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem dougrasmussen@c... 2001-04-08 08:47:37 UTC Re: Machineable wax problem Bill Darby 2001-04-08 09:17:27 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Anderson 2001-04-08 10:14:28 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Anderson 2001-04-08 10:17:06 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem wanliker@a... 2001-04-08 10:28:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem JanRwl@A... 2001-04-08 13:46:20 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-08 13:49:36 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jeff Demand 2001-04-08 14:39:06 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Marcus & Eva 2001-04-08 18:54:53 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jerry Kimberlin 2001-04-08 19:02:24 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jvicars@c... 2001-04-08 19:25:06 UTC Re: Machineable wax problem Jerry Kimberlin 2001-04-08 19:47:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem jesse 2001-04-08 20:44:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem Smoke 2001-04-08 20:52:57 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Ian Wright 2001-04-09 05:10:02 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Joe Vicars 2001-04-09 06:24:31 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Anderson 2001-04-09 06:42:16 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Marcus & Eva 2001-04-09 07:16:58 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Sven Peter, TAD S.A. 2001-04-09 07:42:49 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Elson 2001-04-09 11:36:44 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Ian Wright 2001-04-09 11:55:48 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Andrew Werby 2001-04-09 12:48:17 UTC Machineable wax problem Alan Marconett KM6VV 2001-04-09 12:50:00 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem stratton@m... 2001-04-09 12:57:17 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-09 13:25:26 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Dennis Cranston 2001-04-09 13:40:31 UTC RE: [CAD_CAM_EDM_DRO] Machineable wax problem Ian Wright 2001-04-09 14:57:55 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem R. T. Robbins 2001-04-09 20:08:52 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-09 21:16:46 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-09 21:21:17 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem alenz@c... 2001-04-09 22:41:11 UTC Re: Machineable wax problem