CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Machineable wax problem

Posted by Ian Wright
on 2001-04-09 14:57:55 UTC
Hi Jesse,

I wasn't actually recommending the polyurethane for casting production but
for 'test cuts' when trying out a new g-code script.

Ian
--
Ian W. Wright
Sheffield UK
www.iw63.freeserve.co.uk
----- Original Message -----
From: "jesse" <jkbrennan@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: 09 April 2001 21:24
Subject: Re: [CAD_CAM_EDM_DRO] Machineable wax problem


> Be careful when burning out polyurethane. Combustion products are toxic!
> Machining dust is not too good either.
> Jesse
>
> Alan Marconett KM6VV wrote:
>
> > Hi Ian, List,
> >
> > When I first got my CNC up, someone recommended the "blue" insulation
> > board, like they use in houses! It works! Hadn't thought about the
> > castable polyurethane!
> >
> > Alan KM6VV
> >
> > Ian Wright wrote:
> > >
> > > Ok, I give in, you've convinced me.
> > > On the subject of testing out machine moves, I saw a company a while
back
> > > that was selling 'special' foam to use for testing. All they were
doing was
> > > filling plastic beakers or cups with builders polyurethane foam,
letting it
> > > set and then breaking off the beaker. They were charging many times
the
> > > value of the foam and people were buying them!!
> > >
> > > Ian
> >
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

William Reidsema 2001-04-08 03:25:30 UTC Machineable wax problem jvicars@c... 2001-04-08 07:36:24 UTC Re: Machineable wax problem Larry Goldberg 2001-04-08 08:05:53 UTC Re: Machineable wax problem Marcus & Eva 2001-04-08 08:11:55 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem dougrasmussen@c... 2001-04-08 08:47:37 UTC Re: Machineable wax problem Bill Darby 2001-04-08 09:17:27 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Anderson 2001-04-08 10:14:28 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Anderson 2001-04-08 10:17:06 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem wanliker@a... 2001-04-08 10:28:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem JanRwl@A... 2001-04-08 13:46:20 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-08 13:49:36 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jeff Demand 2001-04-08 14:39:06 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Marcus & Eva 2001-04-08 18:54:53 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jerry Kimberlin 2001-04-08 19:02:24 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jvicars@c... 2001-04-08 19:25:06 UTC Re: Machineable wax problem Jerry Kimberlin 2001-04-08 19:47:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem jesse 2001-04-08 20:44:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Machineable wax problem Smoke 2001-04-08 20:52:57 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Ian Wright 2001-04-09 05:10:02 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Joe Vicars 2001-04-09 06:24:31 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Anderson 2001-04-09 06:42:16 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Marcus & Eva 2001-04-09 07:16:58 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Sven Peter, TAD S.A. 2001-04-09 07:42:49 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Jon Elson 2001-04-09 11:36:44 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Ian Wright 2001-04-09 11:55:48 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Andrew Werby 2001-04-09 12:48:17 UTC Machineable wax problem Alan Marconett KM6VV 2001-04-09 12:50:00 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem stratton@m... 2001-04-09 12:57:17 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-09 13:25:26 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem Dennis Cranston 2001-04-09 13:40:31 UTC RE: [CAD_CAM_EDM_DRO] Machineable wax problem Ian Wright 2001-04-09 14:57:55 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem R. T. Robbins 2001-04-09 20:08:52 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-09 21:16:46 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem jesse 2001-04-09 21:21:17 UTC Re: [CAD_CAM_EDM_DRO] Machineable wax problem alenz@c... 2001-04-09 22:41:11 UTC Re: Machineable wax problem