Re: Whither goest DOS?
Posted by
studleylee
on 2002-01-23 08:27:58 UTC
Hi,
Can you still create a Dos boot disk from the newer OS's? I havnt
tried it in a while. Hopefully the Dos boot will still have access to
the ports and not some minimal window stuff with protected(
crippling ) I/O access. -Lee
Can you still create a Dos boot disk from the newer OS's? I havnt
tried it in a while. Hopefully the Dos boot will still have access to
the ports and not some minimal window stuff with protected(
crippling ) I/O access. -Lee
--- In CAD_CAM_EDM_DRO@y..., "Marcus & Eva" <implmex@a...> wrote:
> Hi all:
> I was under the impression that the later versions of Windoze
offered
> only an approximation of DOS when accessed as "MSDOS" from the main
screen.
> I was also told that if you boot directly to DOS by editing your
MSDOSsys
> file, you will get a clean version that will perform as DOS should.
> Have I been mis-led??
> It seems to be OK for my DOSSHELL application (DX32 Bridgeport
control), but
> if I try to run from "MSDOS" I get a screenful of Chinese noodles!!
> Cheers
>
> Marcus
>
> PS: To Ballendo: I asked around a LOT about upgrading to later
versions of
> Windoze.(I still run 98 SE)
> I got all kinds of inconsistent answers but the general consensus
appeared
> to be that upgrades = problems as the remnants of the old operating
system
> conflict with the new.
> I was told to at least reformat the hard drive before a new OS goes
on.
> I was also told most emphatically by everyone I canvassed (save
one) that XP
> is a nightmare to put on an old system and not worth the hassle.
> When Microsoft describes the system as "stable" they're not talking
about
> the same things as you and I.
> (I think they're describing their profit position!!)
> MC
>
> ----- Original Message -----
> From: "Tony Jeffree" <tony@j...>
> To: <CAD_CAM_EDM_DRO@y...>
> Sent: Wednesday, January 23, 2002 6:29 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Whither goest DOS?
>
>
> > W2K doesn't have a DOS mode in the sense of being able to exit to
DOS as
> > you do in '98, but it can pop up a DOS window. Depending on what
you are
> > doing, this may be OK, but DOS programs that expect direct access
to
> > parallel ports, for example, won't like it.
> >
> > Regards,
> > Tony
> >
> > At 12:42 23/01/2002 +0000, you wrote:
> > >Hello,
> > >
> > >Is DOS "available" in Win XP? Win 2k?
> > >If so, how do you get to it/ set it up?
> > >
> > >Haven't made the plunge beyond win98 yet, and want to know these
> > >answers 'fore I do...
> > >
> > >Thank you in advance.
> > >
> > >Ballendo
Discussion Thread
ballendo
2002-01-23 04:42:43 UTC
Whither goest DOS?
Tony Jeffree
2002-01-23 06:31:07 UTC
Re: [CAD_CAM_EDM_DRO] Whither goest DOS?
Marcus & Eva
2002-01-23 08:21:41 UTC
Re: [CAD_CAM_EDM_DRO] Whither goest DOS?
studleylee
2002-01-23 08:27:58 UTC
Re: Whither goest DOS?
Randy Gordon-Gilmore
2002-01-23 08:45:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
David Goodfellow
2002-01-23 08:48:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Carol & Jerry Jankura
2002-01-23 09:19:20 UTC
Whither goest DOS?
pfrederick1
2002-01-23 09:50:41 UTC
Re: Whither goest DOS?
Fitch R. Williams
2002-01-23 10:22:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
CL
2002-01-23 10:38:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
CL
2002-01-23 10:47:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
dlantz@a...
2002-01-23 10:51:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Jon Elson
2002-01-23 10:58:07 UTC
Re: [CAD_CAM_EDM_DRO] Whither goest DOS?
Carol & Jerry Jankura
2002-01-23 11:02:45 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Jon Elson
2002-01-23 11:14:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Drew Rogge
2002-01-23 11:17:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Kevin P. Martin
2002-01-23 11:21:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ccstratton
2002-01-23 11:50:52 UTC
Re: Whither goest DOS?
Tim
2002-01-23 14:19:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ccs@m...
2002-01-23 14:31:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Hugh Currin
2002-01-23 14:37:02 UTC
Re: Whither goest DOS?
Smoke
2002-01-23 15:28:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Ray
2002-01-23 15:38:38 UTC
Re: Re: Re: Whither goest DOS?
Randy Gordon-Gilmore
2002-01-23 15:41:07 UTC
DOS is dead; long live DOS :-)
Chris L
2002-01-23 15:42:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Whither goest DOS?
Russell Shaw
2002-01-23 16:03:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
wanliker@a...
2002-01-23 17:21:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Bill Vance
2002-01-23 17:59:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
pfrederick1
2002-01-23 18:10:01 UTC
Re: Whither goest DOS?
Russell Shaw
2002-01-23 18:30:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Mr. sausage
2002-01-23 20:16:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
waynegramlich
2002-01-23 20:53:03 UTC
Open source CNC buffer [Was: Whither goest DOS?]
ballendo
2002-01-23 20:56:09 UTC
Re: Whither goest DOS?
Chris L
2002-01-23 21:22:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ballendo
2002-01-23 21:35:17 UTC
Re: Whither goest DOS?
Bill Vance
2002-01-23 21:40:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Carol & Jerry Jankura
2002-01-23 21:48:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ccs@m...
2002-01-23 22:00:11 UTC
Re: USB or Ethernet machine control
Jon Elson
2002-01-23 22:11:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ballendo
2002-01-23 22:36:41 UTC
Re: Whither goest DOS?
ballendo
2002-01-23 23:02:09 UTC
Re: Re: Whither goest DOS?
ballendo
2002-01-23 23:06:15 UTC
microcontrollers for cnc was Re: Whither goest DOS?
ballendo
2002-01-23 23:18:21 UTC
Re: Whither goest DOS?
ballendo
2002-01-24 00:50:52 UTC
Re: USB or Ethernet machine control
Ian Wright
2002-01-24 02:18:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
pfrederick1
2002-01-24 05:02:06 UTC
Re: Whither goest DOS?
dlantz@a...
2002-01-24 05:22:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
pfrederick1
2002-01-24 05:25:09 UTC
Re: Whither goest DOS?
Carol & Jerry Jankura
2002-01-24 05:54:58 UTC
RE: [CAD_CAM_EDM_DRO] Re: USB or Ethernet machine control
pfrederick1
2002-01-24 08:11:09 UTC
Re: Whither goest DOS?
JanRwl@A...
2002-01-24 10:22:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: USB or Ethernet machine control
Jon Elson
2002-01-24 10:54:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
CL
2002-01-24 11:02:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ccs@m...
2002-01-24 11:10:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
CL
2002-01-24 12:11:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ccs@m...
2002-01-24 12:24:01 UTC
Re: glitchy step signals
wanliker@a...
2002-01-24 12:44:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Luc Vercruysse
2002-01-24 13:57:00 UTC
Re: [CAD_CAM_EDM_DRO] Open source CNC buffer [Was: Whither goest DOS?]
Russell Shaw
2002-01-24 14:48:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Carol & Jerry Jankura
2002-01-24 19:05:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ballendo
2002-01-25 00:38:01 UTC
Re: Whither goest DOS?
ballendo
2002-01-25 00:47:16 UTC
Subject headings vs. OT was Re: Whither goest DOS?
ballendo
2002-01-25 02:07:05 UTC
Linux cnc OTHER than EMC was Re: Whither goest DOS?
Ian Wright
2002-01-25 02:41:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ballendo
2002-01-25 05:55:18 UTC
Re: Whither goest DOS?
Dennis Dunn
2002-01-25 06:31:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Russell Shaw
2002-01-25 06:39:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ballendo
2002-01-25 07:04:06 UTC
fpga's for b-box was Re: Whither goest DOS?
ballendo
2002-01-25 07:10:06 UTC
Re: Whither goest DOS?
Dennis Dunn
2002-01-25 07:37:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
CL
2002-01-25 11:18:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ballendo
2002-01-25 12:29:51 UTC
windows controllers master5 was Re: Whither goest DOS?
ballendo
2002-01-25 12:43:33 UTC
Re: Whither goest DOS?
dkowalcz2000
2002-01-25 13:09:00 UTC
Re: USB or Ethernet machine control
ballendo
2002-01-25 13:21:02 UTC
Black boxes was Re: USB or Ethernet machine control
j.guenther
2002-01-25 13:45:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Paul
2002-01-25 17:24:31 UTC
Re: [CAD_CAM_EDM_DRO] Black boxes
Russell Shaw
2002-01-25 17:38:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
Jon Elson
2002-01-25 22:24:06 UTC
Re: [CAD_CAM_EDM_DRO] Black boxes was Re: USB or Ethernet machine control
Jon Elson
2002-01-25 22:42:11 UTC
Re: [CAD_CAM_EDM_DRO] Black boxes
ballendo
2002-01-27 04:50:03 UTC
"gutting" black boxes was Re: Whither goest DOS?
ballendo
2002-01-27 05:20:55 UTC
All those in favor of simple interfaces, say "I" was Re: Whither goest DOS?
ballendo
2002-01-27 06:41:41 UTC
Re: Black boxes
ballendo
2002-01-27 18:33:01 UTC
master 5 group for computer info was Re: Whither goest DOS?
Chris L
2002-01-27 18:48:57 UTC
Re: [CAD_CAM_EDM_DRO] master 5 group for computer info was Re: Whither goest DOS?
Raymond Heckert
2002-01-27 21:09:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Black boxes
Tony Jeffree
2002-01-27 22:15:52 UTC
Re: Patent searches (was Black boxes)
Scot Rogers
2002-01-27 22:58:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Whither goest DOS?
ballendo
2002-01-28 05:09:36 UTC
Us Govt. patent site was Re: Black boxes
Tony Jeffree
2002-01-28 05:24:30 UTC
Re: [CAD_CAM_EDM_DRO] Us Govt. patent site was Re: Black boxes
ballendo
2002-01-28 05:50:11 UTC
Us Govt. patent site was Re: Black boxes
Tony Jeffree
2002-01-28 07:03:07 UTC
Re: [CAD_CAM_EDM_DRO] Us Govt. patent site was Re: Black boxes
ron ginger
2002-01-28 18:39:05 UTC
Black boxes
wanliker@a...
2002-01-28 18:48:09 UTC
Re: [CAD_CAM_EDM_DRO] Black boxes
ballendo
2002-01-29 02:19:50 UTC
Re: Black boxes
Fitch R. Williams
2002-01-29 04:40:14 UTC
Re: [CAD_CAM_EDM_DRO] Black boxes