Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
Posted by
Steve Blackmore
on 2002-03-28 20:38:28 UTC
Thanks for the input on the circuit - Sorry about the metafiles, it's
that or DXF/DWG output from the schematic section of Protel.
If you want to view almost any graphics file try Irfanview - see
http://www.irfanview.com
(Goto downloads page and also download the plugins)
Usual disclaimer + it's free and works!!
I've spotted a couple of errors/omissions myself and the next
generation V2.2 will be posted over the weekend.
I've reduced the number of via's, increased the size of two power
planes and added some more notes.
I need to look at the 7805 input voltage - can someone suggest a
suitable way of feeding it at more than 15v or so?
The rest of the circuit should be able to handle 50 volts with the
rated components I have.
Steve Blackmore
--
Pilot Consultancy Limited ***** Computer Consultants
Telephone 01744 752256 Mobile 07831 768478
Email: steve@... WWW: http://www.pilotltd.net
that or DXF/DWG output from the schematic section of Protel.
If you want to view almost any graphics file try Irfanview - see
http://www.irfanview.com
(Goto downloads page and also download the plugins)
Usual disclaimer + it's free and works!!
I've spotted a couple of errors/omissions myself and the next
generation V2.2 will be posted over the weekend.
I've reduced the number of via's, increased the size of two power
planes and added some more notes.
I need to look at the 7805 input voltage - can someone suggest a
suitable way of feeding it at more than 15v or so?
The rest of the circuit should be able to handle 50 volts with the
rated components I have.
Steve Blackmore
--
Pilot Consultancy Limited ***** Computer Consultants
Telephone 01744 752256 Mobile 07831 768478
Email: steve@... WWW: http://www.pilotltd.net
Discussion Thread
Steve Blackmore
2002-03-27 16:57:25 UTC
Chopper circuit
pfrederick1
2002-03-28 05:41:01 UTC
Re: Chopper circuit
Vajk Fekete
2002-03-28 06:19:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
stephen_stallings
2002-03-28 12:05:30 UTC
Re: Chopper circuit
pfrederick1
2002-03-28 12:25:46 UTC
Re: Chopper circuit
Tony Jeffree
2002-03-28 13:46:18 UTC
Re: Chopper circuit
Steve Blackmore
2002-03-28 20:38:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
RichD.
2002-03-28 21:12:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
Steve Blackmore
2002-03-29 03:34:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
Steve Blackmore
2002-04-02 12:07:07 UTC
Chopper circuit
waynegramlich
2002-04-02 20:02:49 UTC
Re: Chopper circuit
Steve Blackmore
2002-04-03 11:16:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
paul_alz
2002-04-03 15:46:51 UTC
Re: Chopper circuit
andrewyslee
2002-04-03 15:54:29 UTC
safety
Chris L
2002-04-03 16:28:58 UTC
Re: [CAD_CAM_EDM_DRO] safety
waynegramlich
2002-04-03 16:36:57 UTC
Re: Chopper circuit
waynegramlich
2002-04-03 16:41:50 UTC
Re: Chopper circuit
JanRwl@A...
2002-04-03 16:46:35 UTC
Re: [CAD_CAM_EDM_DRO] safety
andrewyslee
2002-04-03 17:45:36 UTC
Re: safety
JanRwl@A...
2002-04-03 18:31:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
mariss92705
2002-04-03 19:01:55 UTC
Re: Chopper circuit
Raymond Heckert
2002-04-03 23:16:06 UTC
Re: [CAD_CAM_EDM_DRO] safety
waynegramlich
2002-04-04 09:37:54 UTC
L298 Commutation Diodes (was Re: Chopper circuit)
paul_alz
2002-04-04 15:55:03 UTC
Re: Chopper circuit
mariss92705
2002-04-04 16:51:05 UTC
L298 Commutation Diodes (was Re: Chopper circuit)
Raymond Heckert
2002-04-04 19:35:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
dave_ace_me
2002-04-04 19:50:29 UTC
Re: Chopper circuit
dave_ace_me
2002-04-04 19:55:25 UTC
OT irfranview ( was Re: Chopper circuit
waynegramlich
2002-04-04 21:18:39 UTC
Re: Chopper circuit
waynegramlich
2002-04-04 21:36:16 UTC
L298 Commutation Diodes (was Re: Chopper circuit)
paul_alz
2002-04-04 23:49:13 UTC
Re: Chopper circuit
dave_ace_me
2002-04-05 05:39:10 UTC
Re: Chopper circuit
paul_alz
2002-04-06 01:04:04 UTC
Re: Chopper circuit
ballendo
2002-04-06 06:47:08 UTC
Re: Chopper circuit
JanRwl@A...
2002-04-06 13:21:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit
mariss92705
2002-04-06 14:06:59 UTC
Re: Chopper circuit
Steve Blackmore
2002-04-06 16:50:32 UTC
[CAD_CAM_EDM_DRO] Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-07 03:19:03 UTC
Re: Was Chopper circuit - Now ver 3.2
Steve Blackmore
2002-04-07 05:00:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-07 09:47:58 UTC
Re: Was Chopper circuit - Now ver 3.2
n4onl
2002-04-07 10:20:22 UTC
Re: Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-07 12:31:11 UTC
Re: Was Chopper circuit - Now ver 3.2
Larry Edington
2002-04-07 13:26:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
n4onl
2002-04-07 15:53:03 UTC
Re: Was Chopper circuit - Now ver 3.2
waynegramlich
2002-04-07 17:21:57 UTC
Re: Was Chopper circuit - Now ver 3.2
Steve Blackmore
2002-04-07 18:05:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-07 18:07:59 UTC
Re: Was Chopper circuit - Now ver 3.2
Tim Goldstein
2002-04-07 19:04:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-07 19:43:07 UTC
Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-07 20:00:17 UTC
Re: Was Chopper circuit - Now ver 3.2
RichD
2002-04-07 20:08:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
marble here
2002-04-07 20:40:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Tim Goldstein
2002-04-07 20:54:18 UTC
RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
marble here
2002-04-07 21:05:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
marble here
2002-04-07 21:09:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Jon Elson
2002-04-07 22:13:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Doug Fortune
2002-04-07 22:33:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Paul Weber
2002-04-07 23:28:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Tony Jeffree
2002-04-07 23:42:39 UTC
Re: Was Chopper circuit - Now ver 3.2
Steve Blackmore
2002-04-08 00:45:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-08 00:49:48 UTC
Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-08 01:01:35 UTC
Re: Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-08 01:13:38 UTC
Re: Was Chopper circuit - Now ver 3.2
Steve Blackmore
2002-04-08 01:17:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-08 02:05:30 UTC
Re: Was Chopper circuit - Now ver 3.2
Tony Jeffree
2002-04-08 02:14:33 UTC
Re: Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-08 02:29:31 UTC
Re: Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-08 02:40:50 UTC
Re: Was Chopper circuit - Now ver 3.2
Paul R. Hvidston
2002-04-08 07:41:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
cadcamcenter
2002-04-08 08:40:22 UTC
Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-08 21:37:12 UTC
Re: Was Chopper circuit - Now ver 3.2
Jon Elson
2002-04-08 21:57:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Larry Edington
2002-04-08 22:17:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Larry Edington
2002-04-08 22:28:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Larry Edington
2002-04-08 22:36:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
RichD
2002-04-08 22:51:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-09 00:08:36 UTC
Re: Was Chopper circuit - Now ver 3.2
paul_alz
2002-04-09 01:01:27 UTC
Re: Was Chopper circuit - Now ver 3.2
Jon Elson
2002-04-09 10:14:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Jon Elson
2002-04-09 10:36:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
mariss92705
2002-04-09 11:54:39 UTC
Re: Was Chopper circuit - Now ver 3.2
Jon Elson
2002-04-09 22:44:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2
Steve Blackmore
2002-04-10 04:01:07 UTC
Re: Was Chopper circuit - Ver 3.2 Web page up
ballendo
2002-04-13 05:31:51 UTC
Re: safety
andrewyslee
2002-04-13 16:01:35 UTC
Re: safety
wanliker@a...
2002-04-13 23:27:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
ballendo
2002-04-14 01:06:45 UTC
Re: Was Chopper circuit - Now ver 3.2
ballendo
2002-04-14 03:44:04 UTC
pcb sources was Re: Was Chopper circuit - Now ver 3.2
dave_ace_me
2002-04-14 06:31:41 UTC
pcb sources was Re: Was Chopper circuit - Now ver 3.2
JanRwl@A...
2002-04-14 16:51:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
andrewyslee
2002-04-14 17:52:15 UTC
safety - pcb dust hazard
mariss92705
2002-04-14 18:06:00 UTC
Re: safety - pcb dust hazard
mariss92705
2002-04-14 18:10:08 UTC
Re: safety
andrewyslee
2002-04-14 18:39:49 UTC
Re: safety - pcb dust hazard
Sven Peter
2002-04-14 18:53:27 UTC
Re: [CAD_CAM_EDM_DRO] safety - pcb dust hazard
marble_h
2002-04-14 19:27:38 UTC
Re: safety - pcb dust hazard
J.Critchfield
2002-04-14 20:09:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard
JanRwl@A...
2002-04-15 00:01:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
JanRwl@A...
2002-04-15 00:05:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
dave_ace_me
2002-04-15 04:05:04 UTC
Re: safety - pcb dust hazard
andrewyslee
2002-04-15 17:45:42 UTC
Re: safety - pcb dust hazard
andrewyslee
2002-04-15 18:17:13 UTC
Re: safety - pcb dust hazard
ballendo
2002-04-16 13:58:59 UTC
Re: safety - pcb dust hazard
Raymond Heckert
2002-04-16 16:01:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
ballendo
2002-04-16 16:44:40 UTC
Re: safety - pcb dust hazard
ballendo
2002-04-17 01:23:05 UTC
What to do in an estop ?!? was Re: safety
mariss92705
2002-04-17 03:03:29 UTC
Re: safety
Sven Peter
2002-04-17 06:49:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
mariss92705
2002-04-17 07:23:55 UTC
Re: safety - pcb dust hazard
dave_ace_me
2002-04-17 10:02:12 UTC
Re: safety - pcb dust hazard
mariss92705
2002-04-17 10:53:38 UTC
Re: safety - pcb dust hazard
dave_ace_me
2002-04-17 20:07:33 UTC
Re: safety - pcb dust hazard
askforum
2002-04-17 20:07:55 UTC
Re: safety - pcb dust hazard
JanRwl@A...
2002-04-17 20:30:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
mariss92705
2002-04-17 22:23:42 UTC
Re: safety - pcb dust hazard
Ward
2002-04-18 01:14:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard
batwings@i...
2002-04-18 04:30:08 UTC
RE: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard
dave_ace_me
2002-04-18 04:57:56 UTC
Re: safety - pcb dust hazard
steveggca
2002-04-18 05:00:12 UTC
What to do in an estop ?!? was Re: safety
Jon Elson
2002-04-18 05:42:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
Raymond Heckert
2002-04-18 09:51:38 UTC
Re: [CAD_CAM_EDM_DRO] What to do in an estop ?!? was Re: safety
Jon Elson
2002-04-18 10:59:03 UTC
Re: [CAD_CAM_EDM_DRO] What to do in an estop ?!? was Re: safety
mariss92705
2002-04-18 11:45:34 UTC
Re: safety
Jon Elson
2002-04-18 23:06:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety
Hugh Prescott
2002-04-19 01:28:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard
ballendo
2002-04-19 06:16:34 UTC
OT Re: safety - pcb dust hazard