Re: Was Chopper circuit - Now ver 3.2

--- In CAD_CAM_EDM_DRO@y..., "n4onl" <umrk@b...> wrote:
>
> He has to add abt 35% (Import Duty and VAT) in addition to having
> them shipped across the pond. That raises his Cost of 3 New 201's
to
> over $500 USD, or abt $400USD for the discontinued ones from Tim.
>
> This was explained in an earlier post by Steve when I mentioned the
> 201's.
>
> I for one am learing from his project. And the Value of Knowledge
is
> a lot. ;)
>
> As for marketing it, I really don't think thats his motive. I
> wouldn't be a bit supprised if his final design ends up in the
Files
> section for anyone to access.
>
> mike
>
>
> --- In CAD_CAM_EDM_DRO@y..., "paul_alz" <paul.w@a...> wrote:
> > Cost !!??
> >
> > I've been designing drives in this industry for close on 30
years,
> so
> > I'd be most interested if you can design, build and market one
> > cheaper !!
> >
> > Paul @ http://www.alzanti.com
> >
> > --- In CAD_CAM_EDM_DRO@y..., Steve Blackmore <steve@p...> wrote:
> > > On Sun, 07 Apr 2002 10:19:02 -0000, you wrote:
> > >
> > > >For lower voltage drives using devices such as L298's you can
> also
> > > >use the LM317T voltage reg. Many maunf of these and cheaper
> than
> > the
> > > >TI part. You will still need some heatsinking though.
> > > >
> > > >For a bigger drive, why not just buy a G201 ?? All the work
has
> > been
> > > >done for you..... "wheels and re-inventing" spring to mind ;-))
> > > >
> > > Cost!!
> > >
> > > Steve Blackmore
> > > --
> > > Pilot Consultancy Limited ***** Computer Consultants
> > > Telephone 01744 752256 Mobile 07831 768478
> > > Email: steve@p... WWW: http://www.pilotltd.net