CAD CAM EDM DRO - Yahoo Group Archive

Re: safety - pcb dust hazard

Posted by mariss92705
on 2002-04-14 18:06:00 UTC
Lee,

What that is probably refering to is fiberglass dust. You probably
are aware of the big hulabaloo regarding asbestos dust and the lung
cancer cases attributed to asbestos. Some have tried to draw a
corrolary to fiberglass.

In my opinion this does not hold water. Asbestos paricles are sub
micron in size while fiberglass particles are much, much larger. They
do have the ability to irritate the skin. I know because I am one of
those people that having crawled thru an attic space filled with
fiberglass will itch for three days afterwards.

To my knowledge, there has never been an established relationship
between fiberglass exposure and any nasty, chronic illness like
cancer.

Still, you don't want to breathe the stuff on a regular basis. Use a
paper filter mask if you are around it.

Mariss



--- In CAD_CAM_EDM_DRO@y..., "andrewyslee" <andrewlee@s...> wrote:
> Hi,
>
> Got this from a website on routing/drilling printed circuit board.
>
> IF AVAILABLE, ALWAYS USE A VACUUM CLEANER TO REMOVE DEBRIS AND
> COLLECT AIRBORNE DUST DURING THE DRILLING OPERATION. THE DUST
> GENERATED DURING PCB DRILLING CAN POSE A VERY SERIOUS HEALTH HAZARD
> AND SHOULD NOT BE INHALED OR INGESTED UNDER ANY CIRCUMSTANCES.
>
> Been drilling/burring PCB without too much precaution. Please tell
me
> I will still get to see tomorrow. The site didn't say what the
serios
> health hazards are. Hope someone can enlighthen us so that we can
be
> more concientious/cautious the next time or give up this hobby.
>
> Thanks
>
> Lee

Discussion Thread

Steve Blackmore 2002-03-27 16:57:25 UTC Chopper circuit pfrederick1 2002-03-28 05:41:01 UTC Re: Chopper circuit Vajk Fekete 2002-03-28 06:19:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit stephen_stallings 2002-03-28 12:05:30 UTC Re: Chopper circuit pfrederick1 2002-03-28 12:25:46 UTC Re: Chopper circuit Tony Jeffree 2002-03-28 13:46:18 UTC Re: Chopper circuit Steve Blackmore 2002-03-28 20:38:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit RichD. 2002-03-28 21:12:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit Steve Blackmore 2002-03-29 03:34:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit Steve Blackmore 2002-04-02 12:07:07 UTC Chopper circuit waynegramlich 2002-04-02 20:02:49 UTC Re: Chopper circuit Steve Blackmore 2002-04-03 11:16:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit paul_alz 2002-04-03 15:46:51 UTC Re: Chopper circuit andrewyslee 2002-04-03 15:54:29 UTC safety Chris L 2002-04-03 16:28:58 UTC Re: [CAD_CAM_EDM_DRO] safety waynegramlich 2002-04-03 16:36:57 UTC Re: Chopper circuit waynegramlich 2002-04-03 16:41:50 UTC Re: Chopper circuit JanRwl@A... 2002-04-03 16:46:35 UTC Re: [CAD_CAM_EDM_DRO] safety andrewyslee 2002-04-03 17:45:36 UTC Re: safety JanRwl@A... 2002-04-03 18:31:59 UTC Re: [CAD_CAM_EDM_DRO] Re: safety mariss92705 2002-04-03 19:01:55 UTC Re: Chopper circuit Raymond Heckert 2002-04-03 23:16:06 UTC Re: [CAD_CAM_EDM_DRO] safety waynegramlich 2002-04-04 09:37:54 UTC L298 Commutation Diodes (was Re: Chopper circuit) paul_alz 2002-04-04 15:55:03 UTC Re: Chopper circuit mariss92705 2002-04-04 16:51:05 UTC L298 Commutation Diodes (was Re: Chopper circuit) Raymond Heckert 2002-04-04 19:35:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit dave_ace_me 2002-04-04 19:50:29 UTC Re: Chopper circuit dave_ace_me 2002-04-04 19:55:25 UTC OT irfranview ( was Re: Chopper circuit waynegramlich 2002-04-04 21:18:39 UTC Re: Chopper circuit waynegramlich 2002-04-04 21:36:16 UTC L298 Commutation Diodes (was Re: Chopper circuit) paul_alz 2002-04-04 23:49:13 UTC Re: Chopper circuit dave_ace_me 2002-04-05 05:39:10 UTC Re: Chopper circuit paul_alz 2002-04-06 01:04:04 UTC Re: Chopper circuit ballendo 2002-04-06 06:47:08 UTC Re: Chopper circuit JanRwl@A... 2002-04-06 13:21:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit mariss92705 2002-04-06 14:06:59 UTC Re: Chopper circuit Steve Blackmore 2002-04-06 16:50:32 UTC [CAD_CAM_EDM_DRO] Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-07 03:19:03 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-07 05:00:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-07 09:47:58 UTC Re: Was Chopper circuit - Now ver 3.2 n4onl 2002-04-07 10:20:22 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-07 12:31:11 UTC Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-07 13:26:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 n4onl 2002-04-07 15:53:03 UTC Re: Was Chopper circuit - Now ver 3.2 waynegramlich 2002-04-07 17:21:57 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-07 18:05:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-07 18:07:59 UTC Re: Was Chopper circuit - Now ver 3.2 Tim Goldstein 2002-04-07 19:04:37 UTC RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-07 19:43:07 UTC Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-07 20:00:17 UTC Re: Was Chopper circuit - Now ver 3.2 RichD 2002-04-07 20:08:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 marble here 2002-04-07 20:40:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Tim Goldstein 2002-04-07 20:54:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 marble here 2002-04-07 21:05:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 marble here 2002-04-07 21:09:10 UTC RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-07 22:13:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Doug Fortune 2002-04-07 22:33:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Paul Weber 2002-04-07 23:28:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Tony Jeffree 2002-04-07 23:42:39 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-08 00:45:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-08 00:49:48 UTC Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-08 01:01:35 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 01:13:38 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-08 01:17:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 02:05:30 UTC Re: Was Chopper circuit - Now ver 3.2 Tony Jeffree 2002-04-08 02:14:33 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 02:29:31 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 02:40:50 UTC Re: Was Chopper circuit - Now ver 3.2 Paul R. Hvidston 2002-04-08 07:41:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 cadcamcenter 2002-04-08 08:40:22 UTC Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-08 21:37:12 UTC Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-08 21:57:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-08 22:17:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-08 22:28:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-08 22:36:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 RichD 2002-04-08 22:51:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-09 00:08:36 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-09 01:01:27 UTC Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-09 10:14:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-09 10:36:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-09 11:54:39 UTC Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-09 22:44:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-10 04:01:07 UTC Re: Was Chopper circuit - Ver 3.2 Web page up ballendo 2002-04-13 05:31:51 UTC Re: safety andrewyslee 2002-04-13 16:01:35 UTC Re: safety wanliker@a... 2002-04-13 23:27:38 UTC Re: [CAD_CAM_EDM_DRO] Re: safety ballendo 2002-04-14 01:06:45 UTC Re: Was Chopper circuit - Now ver 3.2 ballendo 2002-04-14 03:44:04 UTC pcb sources was Re: Was Chopper circuit - Now ver 3.2 dave_ace_me 2002-04-14 06:31:41 UTC pcb sources was Re: Was Chopper circuit - Now ver 3.2 JanRwl@A... 2002-04-14 16:51:19 UTC Re: [CAD_CAM_EDM_DRO] Re: safety andrewyslee 2002-04-14 17:52:15 UTC safety - pcb dust hazard mariss92705 2002-04-14 18:06:00 UTC Re: safety - pcb dust hazard mariss92705 2002-04-14 18:10:08 UTC Re: safety andrewyslee 2002-04-14 18:39:49 UTC Re: safety - pcb dust hazard Sven Peter 2002-04-14 18:53:27 UTC Re: [CAD_CAM_EDM_DRO] safety - pcb dust hazard marble_h 2002-04-14 19:27:38 UTC Re: safety - pcb dust hazard J.Critchfield 2002-04-14 20:09:15 UTC Re: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard JanRwl@A... 2002-04-15 00:01:23 UTC Re: [CAD_CAM_EDM_DRO] Re: safety JanRwl@A... 2002-04-15 00:05:02 UTC Re: [CAD_CAM_EDM_DRO] Re: safety dave_ace_me 2002-04-15 04:05:04 UTC Re: safety - pcb dust hazard andrewyslee 2002-04-15 17:45:42 UTC Re: safety - pcb dust hazard andrewyslee 2002-04-15 18:17:13 UTC Re: safety - pcb dust hazard ballendo 2002-04-16 13:58:59 UTC Re: safety - pcb dust hazard Raymond Heckert 2002-04-16 16:01:33 UTC Re: [CAD_CAM_EDM_DRO] Re: safety ballendo 2002-04-16 16:44:40 UTC Re: safety - pcb dust hazard ballendo 2002-04-17 01:23:05 UTC What to do in an estop ?!? was Re: safety mariss92705 2002-04-17 03:03:29 UTC Re: safety Sven Peter 2002-04-17 06:49:42 UTC Re: [CAD_CAM_EDM_DRO] Re: safety mariss92705 2002-04-17 07:23:55 UTC Re: safety - pcb dust hazard dave_ace_me 2002-04-17 10:02:12 UTC Re: safety - pcb dust hazard mariss92705 2002-04-17 10:53:38 UTC Re: safety - pcb dust hazard dave_ace_me 2002-04-17 20:07:33 UTC Re: safety - pcb dust hazard askforum 2002-04-17 20:07:55 UTC Re: safety - pcb dust hazard JanRwl@A... 2002-04-17 20:30:05 UTC Re: [CAD_CAM_EDM_DRO] Re: safety mariss92705 2002-04-17 22:23:42 UTC Re: safety - pcb dust hazard Ward 2002-04-18 01:14:10 UTC RE: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard batwings@i... 2002-04-18 04:30:08 UTC RE: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard dave_ace_me 2002-04-18 04:57:56 UTC Re: safety - pcb dust hazard steveggca 2002-04-18 05:00:12 UTC What to do in an estop ?!? was Re: safety Jon Elson 2002-04-18 05:42:20 UTC Re: [CAD_CAM_EDM_DRO] Re: safety Raymond Heckert 2002-04-18 09:51:38 UTC Re: [CAD_CAM_EDM_DRO] What to do in an estop ?!? was Re: safety Jon Elson 2002-04-18 10:59:03 UTC Re: [CAD_CAM_EDM_DRO] What to do in an estop ?!? was Re: safety mariss92705 2002-04-18 11:45:34 UTC Re: safety Jon Elson 2002-04-18 23:06:48 UTC Re: [CAD_CAM_EDM_DRO] Re: safety Hugh Prescott 2002-04-19 01:28:37 UTC Re: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard ballendo 2002-04-19 06:16:34 UTC OT Re: safety - pcb dust hazard