CAD CAM EDM DRO - Yahoo Group Archive

Re: Was Chopper circuit - Now ver 3.2

Posted by paul_alz
on 2002-04-07 03:19:03 UTC
For lower voltage drives using devices such as L298's you can also
use the LM317T voltage reg. Many maunf of these and cheaper than the
TI part. You will still need some heatsinking though.

For a bigger drive, why not just buy a G201 ?? All the work has been
done for you..... "wheels and re-inventing" spring to mind ;-))

Paul

--- In CAD_CAM_EDM_DRO@y..., Steve Blackmore <steve@p...> wrote:
> On Sat, 06 Apr 2002 22:06:54 -0000, you wrote:
>
> >Hi,
> >
> >Another one you might want to look at is the TL783C made by TI.
It's
> >claim to fame is you can have an input up to 125VDC higher than
the
> >output. It's what we use in our drives for the regulator.
>
> Thanks for that Mariss, I'll look at that for the next incarnation.
>
> I'm currently on Ver 3.2 - I've tidied the circuit up a bit, moved a
> couple of components around slightly to help with heat sinking and
put
> a parts list in. The overlays are back in wmf format - they are nice
> and small with no loss of quality.
>
> Latest is now http://www.pilotltd.net/chopper32.zip
>
> Somebody asked me about an even higher current version for motors
with
> 4-7A per phase - I can't find a one chip solution, I assume it's
gonna
> need the L298's replacing with some beefy mosfets or could they
simply
> be tagged on to the outputs from a 298?
>
>
>
> Steve Blackmore
> --
> Pilot Consultancy Limited ***** Computer Consultants
> Telephone 01744 752256 Mobile 07831 768478
> Email: steve@p... WWW: http://www.pilotltd.net

Discussion Thread

Steve Blackmore 2002-03-27 16:57:25 UTC Chopper circuit pfrederick1 2002-03-28 05:41:01 UTC Re: Chopper circuit Vajk Fekete 2002-03-28 06:19:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit stephen_stallings 2002-03-28 12:05:30 UTC Re: Chopper circuit pfrederick1 2002-03-28 12:25:46 UTC Re: Chopper circuit Tony Jeffree 2002-03-28 13:46:18 UTC Re: Chopper circuit Steve Blackmore 2002-03-28 20:38:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit RichD. 2002-03-28 21:12:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit Steve Blackmore 2002-03-29 03:34:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit Steve Blackmore 2002-04-02 12:07:07 UTC Chopper circuit waynegramlich 2002-04-02 20:02:49 UTC Re: Chopper circuit Steve Blackmore 2002-04-03 11:16:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit paul_alz 2002-04-03 15:46:51 UTC Re: Chopper circuit andrewyslee 2002-04-03 15:54:29 UTC safety Chris L 2002-04-03 16:28:58 UTC Re: [CAD_CAM_EDM_DRO] safety waynegramlich 2002-04-03 16:36:57 UTC Re: Chopper circuit waynegramlich 2002-04-03 16:41:50 UTC Re: Chopper circuit JanRwl@A... 2002-04-03 16:46:35 UTC Re: [CAD_CAM_EDM_DRO] safety andrewyslee 2002-04-03 17:45:36 UTC Re: safety JanRwl@A... 2002-04-03 18:31:59 UTC Re: [CAD_CAM_EDM_DRO] Re: safety mariss92705 2002-04-03 19:01:55 UTC Re: Chopper circuit Raymond Heckert 2002-04-03 23:16:06 UTC Re: [CAD_CAM_EDM_DRO] safety waynegramlich 2002-04-04 09:37:54 UTC L298 Commutation Diodes (was Re: Chopper circuit) paul_alz 2002-04-04 15:55:03 UTC Re: Chopper circuit mariss92705 2002-04-04 16:51:05 UTC L298 Commutation Diodes (was Re: Chopper circuit) Raymond Heckert 2002-04-04 19:35:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit dave_ace_me 2002-04-04 19:50:29 UTC Re: Chopper circuit dave_ace_me 2002-04-04 19:55:25 UTC OT irfranview ( was Re: Chopper circuit waynegramlich 2002-04-04 21:18:39 UTC Re: Chopper circuit waynegramlich 2002-04-04 21:36:16 UTC L298 Commutation Diodes (was Re: Chopper circuit) paul_alz 2002-04-04 23:49:13 UTC Re: Chopper circuit dave_ace_me 2002-04-05 05:39:10 UTC Re: Chopper circuit paul_alz 2002-04-06 01:04:04 UTC Re: Chopper circuit ballendo 2002-04-06 06:47:08 UTC Re: Chopper circuit JanRwl@A... 2002-04-06 13:21:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Chopper circuit mariss92705 2002-04-06 14:06:59 UTC Re: Chopper circuit Steve Blackmore 2002-04-06 16:50:32 UTC [CAD_CAM_EDM_DRO] Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-07 03:19:03 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-07 05:00:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-07 09:47:58 UTC Re: Was Chopper circuit - Now ver 3.2 n4onl 2002-04-07 10:20:22 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-07 12:31:11 UTC Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-07 13:26:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 n4onl 2002-04-07 15:53:03 UTC Re: Was Chopper circuit - Now ver 3.2 waynegramlich 2002-04-07 17:21:57 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-07 18:05:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-07 18:07:59 UTC Re: Was Chopper circuit - Now ver 3.2 Tim Goldstein 2002-04-07 19:04:37 UTC RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-07 19:43:07 UTC Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-07 20:00:17 UTC Re: Was Chopper circuit - Now ver 3.2 RichD 2002-04-07 20:08:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 marble here 2002-04-07 20:40:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Tim Goldstein 2002-04-07 20:54:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 marble here 2002-04-07 21:05:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 marble here 2002-04-07 21:09:10 UTC RE: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-07 22:13:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Doug Fortune 2002-04-07 22:33:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Paul Weber 2002-04-07 23:28:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Tony Jeffree 2002-04-07 23:42:39 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-08 00:45:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-08 00:49:48 UTC Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-08 01:01:35 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 01:13:38 UTC Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-08 01:17:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 02:05:30 UTC Re: Was Chopper circuit - Now ver 3.2 Tony Jeffree 2002-04-08 02:14:33 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 02:29:31 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-08 02:40:50 UTC Re: Was Chopper circuit - Now ver 3.2 Paul R. Hvidston 2002-04-08 07:41:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 cadcamcenter 2002-04-08 08:40:22 UTC Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-08 21:37:12 UTC Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-08 21:57:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-08 22:17:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-08 22:28:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Larry Edington 2002-04-08 22:36:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 RichD 2002-04-08 22:51:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-09 00:08:36 UTC Re: Was Chopper circuit - Now ver 3.2 paul_alz 2002-04-09 01:01:27 UTC Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-09 10:14:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-09 10:36:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 mariss92705 2002-04-09 11:54:39 UTC Re: Was Chopper circuit - Now ver 3.2 Jon Elson 2002-04-09 22:44:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Was Chopper circuit - Now ver 3.2 Steve Blackmore 2002-04-10 04:01:07 UTC Re: Was Chopper circuit - Ver 3.2 Web page up ballendo 2002-04-13 05:31:51 UTC Re: safety andrewyslee 2002-04-13 16:01:35 UTC Re: safety wanliker@a... 2002-04-13 23:27:38 UTC Re: [CAD_CAM_EDM_DRO] Re: safety ballendo 2002-04-14 01:06:45 UTC Re: Was Chopper circuit - Now ver 3.2 ballendo 2002-04-14 03:44:04 UTC pcb sources was Re: Was Chopper circuit - Now ver 3.2 dave_ace_me 2002-04-14 06:31:41 UTC pcb sources was Re: Was Chopper circuit - Now ver 3.2 JanRwl@A... 2002-04-14 16:51:19 UTC Re: [CAD_CAM_EDM_DRO] Re: safety andrewyslee 2002-04-14 17:52:15 UTC safety - pcb dust hazard mariss92705 2002-04-14 18:06:00 UTC Re: safety - pcb dust hazard mariss92705 2002-04-14 18:10:08 UTC Re: safety andrewyslee 2002-04-14 18:39:49 UTC Re: safety - pcb dust hazard Sven Peter 2002-04-14 18:53:27 UTC Re: [CAD_CAM_EDM_DRO] safety - pcb dust hazard marble_h 2002-04-14 19:27:38 UTC Re: safety - pcb dust hazard J.Critchfield 2002-04-14 20:09:15 UTC Re: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard JanRwl@A... 2002-04-15 00:01:23 UTC Re: [CAD_CAM_EDM_DRO] Re: safety JanRwl@A... 2002-04-15 00:05:02 UTC Re: [CAD_CAM_EDM_DRO] Re: safety dave_ace_me 2002-04-15 04:05:04 UTC Re: safety - pcb dust hazard andrewyslee 2002-04-15 17:45:42 UTC Re: safety - pcb dust hazard andrewyslee 2002-04-15 18:17:13 UTC Re: safety - pcb dust hazard ballendo 2002-04-16 13:58:59 UTC Re: safety - pcb dust hazard Raymond Heckert 2002-04-16 16:01:33 UTC Re: [CAD_CAM_EDM_DRO] Re: safety ballendo 2002-04-16 16:44:40 UTC Re: safety - pcb dust hazard ballendo 2002-04-17 01:23:05 UTC What to do in an estop ?!? was Re: safety mariss92705 2002-04-17 03:03:29 UTC Re: safety Sven Peter 2002-04-17 06:49:42 UTC Re: [CAD_CAM_EDM_DRO] Re: safety mariss92705 2002-04-17 07:23:55 UTC Re: safety - pcb dust hazard dave_ace_me 2002-04-17 10:02:12 UTC Re: safety - pcb dust hazard mariss92705 2002-04-17 10:53:38 UTC Re: safety - pcb dust hazard dave_ace_me 2002-04-17 20:07:33 UTC Re: safety - pcb dust hazard askforum 2002-04-17 20:07:55 UTC Re: safety - pcb dust hazard JanRwl@A... 2002-04-17 20:30:05 UTC Re: [CAD_CAM_EDM_DRO] Re: safety mariss92705 2002-04-17 22:23:42 UTC Re: safety - pcb dust hazard Ward 2002-04-18 01:14:10 UTC RE: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard batwings@i... 2002-04-18 04:30:08 UTC RE: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard dave_ace_me 2002-04-18 04:57:56 UTC Re: safety - pcb dust hazard steveggca 2002-04-18 05:00:12 UTC What to do in an estop ?!? was Re: safety Jon Elson 2002-04-18 05:42:20 UTC Re: [CAD_CAM_EDM_DRO] Re: safety Raymond Heckert 2002-04-18 09:51:38 UTC Re: [CAD_CAM_EDM_DRO] What to do in an estop ?!? was Re: safety Jon Elson 2002-04-18 10:59:03 UTC Re: [CAD_CAM_EDM_DRO] What to do in an estop ?!? was Re: safety mariss92705 2002-04-18 11:45:34 UTC Re: safety Jon Elson 2002-04-18 23:06:48 UTC Re: [CAD_CAM_EDM_DRO] Re: safety Hugh Prescott 2002-04-19 01:28:37 UTC Re: [CAD_CAM_EDM_DRO] Re: safety - pcb dust hazard ballendo 2002-04-19 06:16:34 UTC OT Re: safety - pcb dust hazard