Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Posted by
bobmcknight@c...
on 2006-01-20 20:58:04 UTC
I made a plate of 1/8 steel to mount between the bed and acme
screw support bearing. The stepping motor mounts to this plate.
I welded a flange around part of the perimeter of the plate to stiffen
it up. I used a toothed belt between the stepping motor and the
handwheel. I bored the gear to slip over the hand wheel and
dimpled the handwheel for the gear setscrews.
This did not keep the machine from being used while I get it
finished. I used Ah-ha control which I have had for many years.
bob mcknight
To: CAD_CAM_EDM_DRO@yahoogroups.com
From: Art Eckstein <a_eckstein@...>
Date sent: Fri, 20 Jan 2006 21:06:44 -0500
Subject: Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC
Conversion Kit /
Instructions / Help? :D
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com
[ Double-click this line for list subscription options ]
Dan,
To put it mildly, I did my own thing!
I measured, and made my own ball nut holders and then actually
measured the length of the axis I wanted and cadded all the parts up
and started making scrap metal.
I would be more than happy to share my "working drawing" with you
and
share some of the things that I would do differently if I were to do
it over again (mainly in my X axis mount). For the Z axis, I drove
the micro feed instead of some of the more exotic systems that are
out there, but all in all I am happy with the system I have. In case
you are interested, this is a servo based system but just as easily
could be done with steppers.
Bubba
At 12:11 AM 1/20/2006, you wrote:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.20/233 - Release Date:
1/18/2006
screw support bearing. The stepping motor mounts to this plate.
I welded a flange around part of the perimeter of the plate to stiffen
it up. I used a toothed belt between the stepping motor and the
handwheel. I bored the gear to slip over the hand wheel and
dimpled the handwheel for the gear setscrews.
This did not keep the machine from being used while I get it
finished. I used Ah-ha control which I have had for many years.
bob mcknight
To: CAD_CAM_EDM_DRO@yahoogroups.com
From: Art Eckstein <a_eckstein@...>
Date sent: Fri, 20 Jan 2006 21:06:44 -0500
Subject: Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC
Conversion Kit /
Instructions / Help? :D
Send reply to: CAD_CAM_EDM_DRO@yahoogroups.com
[ Double-click this line for list subscription options ]
Dan,
To put it mildly, I did my own thing!
I measured, and made my own ball nut holders and then actually
measured the length of the axis I wanted and cadded all the parts up
and started making scrap metal.
I would be more than happy to share my "working drawing" with you
and
share some of the things that I would do differently if I were to do
it over again (mainly in my X axis mount). For the Z axis, I drove
the micro feed instead of some of the more exotic systems that are
out there, but all in all I am happy with the system I have. In case
you are interested, this is a servo based system but just as easily
could be done with steppers.
Bubba
At 12:11 AM 1/20/2006, you wrote:
>Hello all,Addresses:
>
> I have a Rong Fu 31. I have been wanting to cnc it
>for awhile now. I have found a few kits for this model
>but they all seem to be around the 3,000+ mark. Does
>anyone know of a kit that costs less than this or
>maybe someone has done a DIY cnc kit for this mill and
>documented where they bought the parts and what they
>had to do to make it work. Any information about
>cnc'ing thing mill would be welcome.
>
>Thanks
>Dan.
>
>__
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.20/233 - Release Date:
1/18/2006
Discussion Thread
Owen
2006-01-19 15:16:04 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
Jon Elson
2006-01-19 18:50:00 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
Owen
2006-01-19 20:30:03 UTC
RE: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
joe camel
2006-01-19 21:38:11 UTC
Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
ED MAISEY
2006-01-20 01:40:39 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Roy J. Tellason
2006-01-20 08:07:01 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
Jon Elson
2006-01-20 09:23:48 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
Jon Elson
2006-01-20 09:27:33 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
cnc002@a...
2006-01-20 09:33:19 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
cnc002@a...
2006-01-20 09:56:05 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
Roy J. Tellason
2006-01-20 10:06:26 UTC
Re: [CAD_CAM_EDM_DRO] replacing servo motor help >signal phase
Owen
2006-01-20 16:37:39 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Art Eckstein
2006-01-20 18:12:17 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Darren Lucke
2006-01-20 19:00:56 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-20 19:40:14 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
bobmcknight@c...
2006-01-20 20:58:04 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Darren Lucke
2006-01-20 21:01:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 03:51:36 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Art Eckstein
2006-01-21 07:04:40 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Darren Lucke
2006-01-21 08:24:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 10:33:50 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Jon Elson
2006-01-21 12:03:07 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 12:50:38 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Owen
2006-01-21 13:29:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Owen
2006-01-21 13:32:29 UTC
Re: [CAD_CAM_EDM_DRO] Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
turyga1963
2006-01-21 17:30:25 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Darren Lucke
2006-01-21 19:15:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 19:50:13 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 20:01:15 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 20:13:09 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Owen
2006-01-21 20:19:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Darren Lucke
2006-01-21 20:21:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Darren Lucke
2006-01-21 20:23:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 22:32:42 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
cncgramps
2006-01-21 23:06:21 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Darren Lucke
2006-01-21 23:12:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Dan Mauch
2006-01-22 08:35:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
joe camel
2006-02-17 01:46:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
joe camel
2006-05-11 14:40:17 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Alan Marconett
2006-05-11 14:55:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Abby Katt
2006-05-11 16:18:56 UTC
Conversion Update: 2/3 - also - Rong Fu 31/25 CNC Conversion Help?
R Rogers
2006-05-11 16:23:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
R Rogers
2006-05-11 16:31:43 UTC
Re: [CAD_CAM_EDM_DRO] Conversion Update: 2/3 - also - Rong Fu 31/25 CNC Conversion Help?
Dan Mauch
2006-05-11 21:05:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
ballendo
2006-05-11 23:49:45 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
ballendo
2006-05-11 23:57:27 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Polaraligned
2006-05-12 03:58:38 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
R Rogers
2006-05-12 06:14:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
ballendo
2006-05-12 06:37:28 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
R Rogers
2006-05-12 07:04:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
R Rogers
2006-05-12 07:11:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
ballendo
2006-05-12 08:18:53 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
Polaraligned
2006-05-12 09:16:21 UTC
Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D
R Rogers
2006-05-12 10:04:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Rong Fu 31 CNC Conversion Kit / Instructions / Help? :D