CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater

Posted by Ian Wright
on 2000-12-21 13:44:51 UTC
----- Original Message -----
From: "James Owens" <wotisname@...>
>
> There are a couple disadvantages to micro-bore piping. You and I live in
> soft water areas, if this system was fitted nearer London the scale build
up
> in a few weeks would block the system. There is a little longer warm-up
> period but that is no great problem except if you have the timer set so
the

Hi Terry,

You may be right about the scale issue although I'm not convinced. Scale
doesn't usually stick easily to polythene pipe and the speed of flow through
the pipes is usually higher than in a larger bore system. Initial heat up is
anything but slower - my present system takes about 5 minutes to get ALL the
radiators in the house up to full temperature from cold, my experience with
other larger bore domestic systems is that the heat percolates slowly from
one radiator to the next over a much longer period (I must admit that my
experience in this field is a bit limited as my working life was as a
building services engineer in commercial and industrial premises, much
bigger systems!). I think it is the misconception of the efficiency of this
system which has held it back (little pipes can't be any use can they?),
but, in practice, the total flow through the system is the same as a
'conventional' system but usually done at a higher flow rate - you can do
this as you don't get the 'cavitation' effects of larger bore pipe.

Have a good Christmas,

Ian
--
--

Merry Christmas; Inpakaramaana Vidumurai; Froliche Weihnachten; Sarbatori
Fericite; Zalig Kerstfeest; Mele Kalikimake; Happy Hanukkah; Pari
Artsagourt; Shub Naya Baras; Vesele Vanoce; Feliz Navidad; Joyeux Noel; Bom
Natal; God Jul; Kala Xristougenna; Buon Natale; Kellemes Unnepeket; Gelukkig
Nieuwjaar; Chin Chi Shen Tan; Felichan Jarfinon; Stastny Novy Rok; Wesolych
Swiat; Hyvaeae Joulua; Chag Sameach; Boas Festas; Gut Yontif; Iyi Yillar and
a Happy New Year.

Ian W. Wright
http://www.iw63.freeserve.co.uk/

'Music is the filling of regular time intervals with harmonious
oscillations.'

Discussion Thread

marco@m... 2000-12-19 07:44:08 UTC OT: Intro + Q:Selecting workshop heater Jon Anderson 2000-12-19 08:30:00 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Joe Fahy 2000-12-19 09:56:39 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Marcus & Eva 2000-12-19 10:49:44 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Smoke 2000-12-19 10:53:35 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Tim Goldstein 2000-12-19 10:55:25 UTC RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Steve Gunsel 2000-12-19 11:00:38 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Smoke 2000-12-19 11:04:54 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater John Murphy 2000-12-19 11:39:30 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Alan Marconett KM6VV 2000-12-19 12:28:16 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Wally K 2000-12-19 14:22:47 UTC Re: OT: Intro + Q:Selecting workshop heater James Owens 2000-12-19 15:34:50 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Alan Rothenbush 2000-12-19 16:24:23 UTC Re: OT: Intro + Q:Selecting workshop heater dave engvall 2000-12-19 16:52:26 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater marble here 2000-12-19 20:33:30 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater diazden 2000-12-19 20:57:30 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Tim Goldstein 2000-12-19 21:11:33 UTC RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Jeff Barlow 2000-12-19 21:25:50 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Joe Fahy 2000-12-19 21:55:38 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Jon Elson 2000-12-19 22:23:03 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Ian Wright 2000-12-20 01:45:30 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater diazden 2000-12-20 06:03:47 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Tim Goldstein 2000-12-20 06:24:30 UTC RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Tim Goldstein 2000-12-20 06:24:32 UTC RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Tim Goldstein 2000-12-20 06:24:34 UTC RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater BillDarby 2000-12-20 06:54:24 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Doug Harrison 2000-12-20 07:50:24 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Alan Marconett KM6VV 2000-12-20 10:35:47 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater ballendo@y... 2000-12-20 13:41:10 UTC re:Re: OT: Intro + Q:Selecting workshop heater ballendo@y... 2000-12-20 16:11:45 UTC Re: OT: Intro + Q:Selecting workshop heater Ian Wright 2000-12-21 04:42:16 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater James Owens 2000-12-21 07:24:23 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Smoke 2000-12-21 10:39:45 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Alan Marconett KM6VV 2000-12-21 10:57:03 UTC Re: OT: Intro + Q:Selecting workshop heater Ian Wright 2000-12-21 13:44:51 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater James Owens 2000-12-22 02:23:19 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Tony Jeffree 2000-12-22 02:48:40 UTC Re: OT: Intro + Q:Selecting workshop heater Smoke 2000-12-22 09:13:18 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Ian Wright 2000-12-22 14:51:41 UTC Re: [CAD_CAM_EDM_DRO] Re: OT: Intro + Q:Selecting workshop heater Ian Wright 2000-12-22 14:54:03 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Smoke 2000-12-22 15:18:57 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater dave engvall 2000-12-28 18:54:11 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Smoke 2000-12-28 19:16:58 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater dave engvall 2000-12-28 22:47:34 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater Smoke 2000-12-28 23:06:59 UTC Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater