Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Posted by
Smoke
on 2000-12-22 15:18:57 UTC
:-D Nope. This was in this old house I'm living in. Don't know how long
the pipes have been there but they definitely had scale in them. I'm in
Colorado now ...we get lots of alkalai water here. I've even seen old PVC
pipes that have been tossed out at the local junk yard with scale build up.
I think several other water lines here should be replaced. The lines to the
kitchen come directly from the main inlet pipe and the water pressure there
is low compared to the pressure from the other lines. My guess is they need
to be replaced. But since I rent....I'm not going to do it.
Smoke
the pipes have been there but they definitely had scale in them. I'm in
Colorado now ...we get lots of alkalai water here. I've even seen old PVC
pipes that have been tossed out at the local junk yard with scale build up.
I think several other water lines here should be replaced. The lines to the
kitchen come directly from the main inlet pipe and the water pressure there
is low compared to the pressure from the other lines. My guess is they need
to be replaced. But since I rent....I'm not going to do it.
Smoke
>Was this on the 'mountain dew' stills?
>
>Ian
Discussion Thread
marco@m...
2000-12-19 07:44:08 UTC
OT: Intro + Q:Selecting workshop heater
Jon Anderson
2000-12-19 08:30:00 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Joe Fahy
2000-12-19 09:56:39 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Marcus & Eva
2000-12-19 10:49:44 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-19 10:53:35 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-19 10:55:25 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Steve Gunsel
2000-12-19 11:00:38 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-19 11:04:54 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
John Murphy
2000-12-19 11:39:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Marconett KM6VV
2000-12-19 12:28:16 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Wally K
2000-12-19 14:22:47 UTC
Re: OT: Intro + Q:Selecting workshop heater
James Owens
2000-12-19 15:34:50 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Rothenbush
2000-12-19 16:24:23 UTC
Re: OT: Intro + Q:Selecting workshop heater
dave engvall
2000-12-19 16:52:26 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
marble here
2000-12-19 20:33:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
diazden
2000-12-19 20:57:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-19 21:11:33 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Jeff Barlow
2000-12-19 21:25:50 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Joe Fahy
2000-12-19 21:55:38 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Jon Elson
2000-12-19 22:23:03 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-20 01:45:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
diazden
2000-12-20 06:03:47 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-20 06:24:30 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-20 06:24:32 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-20 06:24:34 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
BillDarby
2000-12-20 06:54:24 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Doug Harrison
2000-12-20 07:50:24 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Marconett KM6VV
2000-12-20 10:35:47 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
ballendo@y...
2000-12-20 13:41:10 UTC
re:Re: OT: Intro + Q:Selecting workshop heater
ballendo@y...
2000-12-20 16:11:45 UTC
Re: OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-21 04:42:16 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
James Owens
2000-12-21 07:24:23 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-21 10:39:45 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Marconett KM6VV
2000-12-21 10:57:03 UTC
Re: OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-21 13:44:51 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
James Owens
2000-12-22 02:23:19 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tony Jeffree
2000-12-22 02:48:40 UTC
Re: OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-22 09:13:18 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-22 14:51:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-22 14:54:03 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-22 15:18:57 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
dave engvall
2000-12-28 18:54:11 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-28 19:16:58 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
dave engvall
2000-12-28 22:47:34 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-28 23:06:59 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater