Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Posted by
dave engvall
on 2000-12-28 22:47:34 UTC
Smoke wrote:
water then nothing is needed to prevent scale.
Conductivity is a good measure of dissolved (ionic) solids and is often used to check the quality of distilled water or DI
(deionized water). RO water is another story as it is usually only about 10 times better than the feed water.
dave
> That's probably a good idea Dave. I think I'd pour some vinegar in theNo need for the vinegar, rain water is pretty good and a DI cartridge will just make it better. If there are no minerals in the
> system anyway. Vinegar is great for removing scale build up. Just try
> ouring some in a teapot with heavyscale inside sometime. You'll be amazed
> at how well it works.
>
> Smoke
water then nothing is needed to prevent scale.
Conductivity is a good measure of dissolved (ionic) solids and is often used to check the quality of distilled water or DI
(deionized water). RO water is another story as it is usually only about 10 times better than the feed water.
dave
Discussion Thread
marco@m...
2000-12-19 07:44:08 UTC
OT: Intro + Q:Selecting workshop heater
Jon Anderson
2000-12-19 08:30:00 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Joe Fahy
2000-12-19 09:56:39 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Marcus & Eva
2000-12-19 10:49:44 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-19 10:53:35 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-19 10:55:25 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Steve Gunsel
2000-12-19 11:00:38 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-19 11:04:54 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
John Murphy
2000-12-19 11:39:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Marconett KM6VV
2000-12-19 12:28:16 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Wally K
2000-12-19 14:22:47 UTC
Re: OT: Intro + Q:Selecting workshop heater
James Owens
2000-12-19 15:34:50 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Rothenbush
2000-12-19 16:24:23 UTC
Re: OT: Intro + Q:Selecting workshop heater
dave engvall
2000-12-19 16:52:26 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
marble here
2000-12-19 20:33:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
diazden
2000-12-19 20:57:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-19 21:11:33 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Jeff Barlow
2000-12-19 21:25:50 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Joe Fahy
2000-12-19 21:55:38 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Jon Elson
2000-12-19 22:23:03 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-20 01:45:30 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
diazden
2000-12-20 06:03:47 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-20 06:24:30 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-20 06:24:32 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tim Goldstein
2000-12-20 06:24:34 UTC
RE: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
BillDarby
2000-12-20 06:54:24 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Doug Harrison
2000-12-20 07:50:24 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Marconett KM6VV
2000-12-20 10:35:47 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
ballendo@y...
2000-12-20 13:41:10 UTC
re:Re: OT: Intro + Q:Selecting workshop heater
ballendo@y...
2000-12-20 16:11:45 UTC
Re: OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-21 04:42:16 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
James Owens
2000-12-21 07:24:23 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-21 10:39:45 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Alan Marconett KM6VV
2000-12-21 10:57:03 UTC
Re: OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-21 13:44:51 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
James Owens
2000-12-22 02:23:19 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Tony Jeffree
2000-12-22 02:48:40 UTC
Re: OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-22 09:13:18 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-22 14:51:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT: Intro + Q:Selecting workshop heater
Ian Wright
2000-12-22 14:54:03 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-22 15:18:57 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
dave engvall
2000-12-28 18:54:11 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-28 19:16:58 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
dave engvall
2000-12-28 22:47:34 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater
Smoke
2000-12-28 23:06:59 UTC
Re: [CAD_CAM_EDM_DRO] OT: Intro + Q:Selecting workshop heater