Re: [CAD_CAM_EDM_DRO] Vacuum Table

I think it was Jesse who supplied the link, not me (There are far too many
John's on the list). `.) Credit where credit is due.

John H.




John,
Superb Link. It will be my place for the next few days.
I work for a chipboard factory frequently and quite a few
of the questions I have will be answered by this page.
Thank you VERY much
Sven Peter

info.host@... wrote:

> MDF is medium density fibre board. There is some called marine MDF which

is

> sealed in some way against water. There have been a lot of questions as to
> whether or not it's carcinogenic, and so safe or not safe for school to

use.

> In school we're not aloud to put it on the wall sanders or disc sanders
> because it gets so much of the dust airborne. We're aloud to work it by

hand

> but the dust has to be kept minimal. I think so long as you don't eat it
> you'll be fine (Poor Sam still isn't out the hospital after making that
> mistake).
>
> John H.
>
> > For a discription of MDF see:
> > http://www.anu.edu.au/Forestry/wood/mdf/starter.html
> > More than you want to know- but.
> > MDF is a step up from particle board that you will find at Home Depot

in

> > the US (sorry Sven)
> > Particle board is very suseptable to water damage. MDF less so.
> > Jesse
> >
> >
> > "Scott M. Thomas" wrote:
> >
> >> What is MDF?
> >
> > If I am not wrong it is the modern stuff that substitutes plywood
> > and duropanel. It is crunched or stone milled wood fibre with melamin
> resin
> > and cooked to give a smooth and uniform sheet panel from 4 to 35mm

thick.

> > It is very nice to work with and doesn´t bend and is less effected by
> water
> > than the older materials.
> > Am I wright?
> > Sven Peter
> >
>
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/