Re: Vacuum Table
Posted by
roboticscnc
on 2007-02-16 03:45:02 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, H & J Johnson <hjjohnson@...>
wrote:
the two. As was mentioned the pressure is applied both to the top and
bottom of the surface so no 'net change' occurs. The beauty of a
vacuum is the immense pressure which can be obtained WITHOUT have to
build the table extra heavy.
I think the original question about this subject was if anyone had
pictures or plans for a vacuum table.
The replies seem to indicate people are referring to different designs.
If a vacuum table is designed as a box with a hose to a vacuum pump
and a few pin holes on one face it needs to be strong enough to
contain the vacuum or it will deflect due to atmospheric pressure.
Does anyone have pictures or plans for a vacuum table ?
Thanks,
Glen.
wrote:
>non-vacuum] as there is no 'atmoshereic pressure difference' between
> No extra bracing will be required for a vacuum table [over a
the two. As was mentioned the pressure is applied both to the top and
bottom of the surface so no 'net change' occurs. The beauty of a
vacuum is the immense pressure which can be obtained WITHOUT have to
build the table extra heavy.
>HI Group,
> FWIW
> Jarrett
>
>
>
> ----- Original Message -----
> From: JanRwl@...
> Date: Thursday, February 15, 2007 1:35 am
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
>
> >
> > In a message dated 2/15/2007 1:26:51 A.M. Central Standard Time,
> > penguin@... writes:
> >
> > You'll need to design internal bracing in the hold
> > down table to resist this, or it will implode (or more likely,
> > sag a bit).
> >
> >
> >
> > What about the force the atmosphere imparts pushing UP on the
> > same
> > table-surface??? Won't the table be blown through the roof?
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@..., timg@...
> > Moderator: pentam@... indigo_red@...
> > davemucha@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to
> > be a sister site to the CCED group, as many of the same members
> > are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
I think the original question about this subject was if anyone had
pictures or plans for a vacuum table.
The replies seem to indicate people are referring to different designs.
If a vacuum table is designed as a box with a hose to a vacuum pump
and a few pin holes on one face it needs to be strong enough to
contain the vacuum or it will deflect due to atmospheric pressure.
Does anyone have pictures or plans for a vacuum table ?
Thanks,
Glen.
Discussion Thread
William Scalione
2001-06-22 17:38:47 UTC
Vacuum Table
jesse
2001-06-22 17:58:21 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
Tim Goldstein
2001-06-22 18:35:14 UTC
RE: [CAD_CAM_EDM_DRO] Vacuum Table
Bob Campbell
2001-06-22 18:45:53 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
dougrasmussen@c...
2001-06-22 19:45:22 UTC
Re: Vacuum Table
Rich D.
2001-06-22 20:02:34 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
jesse
2001-06-23 09:59:17 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
William Scalione
2001-06-23 11:20:59 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
Jon Elson
2001-06-23 15:21:15 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
ballendo@y...
2001-06-23 16:45:53 UTC
Re: Vacuum Table
Doug Harrison
2001-06-23 17:36:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
jesse
2001-06-23 19:51:20 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
jesse
2001-06-23 19:51:42 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
Scott M. Thomas
2001-06-23 21:20:05 UTC
RE: [CAD_CAM_EDM_DRO] Vacuum Table
William Scalione
2001-06-23 21:23:54 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
Sven Peter, TAD S.A.
2001-06-23 21:34:54 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
Tim Goldstein
2001-06-23 21:41:00 UTC
RE: [CAD_CAM_EDM_DRO] Vacuum Table
Jon Elson
2001-06-23 22:57:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
jesse
2001-06-24 05:30:06 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
info.host@b...
2001-06-24 06:34:33 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
Sven Peter, TAD S.A.
2001-06-24 06:46:03 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
cadcamcenter@y...
2001-06-24 06:58:53 UTC
Vacuum Table
Sven Peter, TAD S.A.
2001-06-24 07:08:51 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
info.host@b...
2001-06-24 08:13:37 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
JanRwl@A...
2001-06-24 15:55:32 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
cadcamcenter@y...
2001-06-24 21:38:34 UTC
Re: Vacuum Table
Sven Peter, TAD S.A.
2001-06-24 22:21:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
Sven Peter, TAD S.A.
2001-06-24 22:24:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
cadcamcenter@y...
2001-06-25 02:41:45 UTC
Re: Vacuum Table
Sven Peter, TAD S.A.
2001-06-25 05:26:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
Kevin P. Martin
2001-06-25 08:16:21 UTC
RE: [CAD_CAM_EDM_DRO] Vacuum Table
Bob Campbell
2001-06-25 09:03:04 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
brian
2001-06-25 09:37:32 UTC
Re: [CAD_CAM_EDM_DRO] Vacuum Table
ballendo@y...
2001-06-26 04:07:23 UTC
Re: Vacuum Table
ballendo@y...
2001-06-26 04:21:01 UTC
Re: Vacuum Table
ballendo@y...
2001-06-26 04:44:19 UTC
mdf for machines was Re: Vacuum Table
ballendo@y...
2001-06-26 04:49:46 UTC
Re: Vacuum Table
Carol & Jerry Jankura
2001-06-26 04:51:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: Vacuum Table
ballendo@y...
2001-06-26 05:13:42 UTC
Machine materials was Re: Vacuum Table
ballendo@y...
2001-06-26 05:28:15 UTC
Re: Vacuum Table
Paul
2001-06-26 12:08:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
ballendo@y...
2001-06-26 17:51:10 UTC
Re: Vacuum Table
Sven Peter, TAD S.A.
2001-06-26 21:42:10 UTC
Re: [CAD_CAM_EDM_DRO] Machine materials was Re: Vacuum Table
cncnovice
2007-02-12 06:42:26 UTC
Vacuum Table
turbulatordude
2007-02-12 17:30:18 UTC
Re: Vacuum Table
Sebastien Bailard
2007-02-14 23:26:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
JanRwl@A...
2007-02-14 23:37:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
H & J Johnson
2007-02-15 06:12:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
turbulatordude
2007-02-15 07:21:11 UTC
Re: Vacuum Table
Chris Brown
2007-02-15 07:45:48 UTC
Re: Vacuum Table
H & J Johnson
2007-02-15 08:19:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
David G. LeVine
2007-02-15 10:34:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
H & J Johnson
2007-02-15 11:49:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Vacuum Table
roboticscnc
2007-02-16 03:45:02 UTC
Re: Vacuum Table