CAD CAM EDM DRO - Yahoo Group Archive

Re: 2 Fried G210's in a single day :-(

Posted by keongsan
on 2002-05-04 00:46:54 UTC
audiomaker2000 wrote:

> For instance, I did not put the capacitor in the power line since
> my leads are more than 18" from the power supply (didn't have any
> handy), but I wrongly figured this was to somehow smooth out the
> voltage but might only loose a bit of performace without
> them...wrong... they are critical to the safety of the drive.

SAFETY? Hope you will elaborate for the benefits of the rest of the
dummies on the list.

> Another thing I learned from Mariss is that fuses between the DC
> supply and the drive act as resistors and increase the need for
this
> cap.

Hope someone can answer this. If a cap at the Gecko's mouth is a good
thing, so more will be better right? So let's put a capacitor more
than the 470uF at the Gecko's mouth? perhaps 2,000uF?

Thanks

Discussion Thread

audiomaker2000 2002-05-03 15:04:15 UTC 2 Fried G210's in a single day :-( audiomaker2000 2002-05-03 18:19:36 UTC Re: 2 Fried G210's in a single day :-( art 2002-05-03 18:28:26 UTC Re: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( Alan Marconett KM6VV 2002-05-03 20:05:29 UTC Re: [CAD_CAM_EDM_DRO] 2 Fried G210's in a single day :-( Peter 2002-05-03 20:48:05 UTC Re: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( dave_ace_me 2002-05-03 21:00:32 UTC fusing Gecko leads ( was Re: 2 Fried G210's in a single day :-( Carol & Jerry Jankura 2002-05-03 22:21:26 UTC RE: [CAD_CAM_EDM_DRO] fusing Gecko leads ( was Re: 2 Fried G210's in a single day :-( Jon Elson 2002-05-03 22:45:14 UTC Re: [CAD_CAM_EDM_DRO] 2 Fried G210's in a single day :-( studleylee 2002-05-03 23:35:31 UTC fusing Gecko leads ( was Re: 2 Fried G210's in a single day :-( studleylee 2002-05-03 23:39:42 UTC fusing Gecko leads ( was Re: 2 Fried G210's in a single day :-( keongsan 2002-05-04 00:46:54 UTC Re: 2 Fried G210's in a single day :-( keongsan 2002-05-04 00:59:12 UTC Re: 2 Fried G210's in a single day :-( Dan Mauch 2002-05-04 08:51:00 UTC RE: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( audiomaker2000 2002-05-04 09:35:04 UTC Re: 2 Fried G210's in a single day :-( audiomaker2000 2002-05-04 09:38:04 UTC Re: 2 Fried G210's in a single day :-( Alan Marconett KM6VV 2002-05-04 10:11:56 UTC Re: [CAD_CAM_EDM_DRO] fusing Gecko leads ( was Re: 2 Fried G210's in a single day :-( Alan Marconett KM6VV 2002-05-04 10:33:17 UTC Re: [CAD_CAM_EDM_DRO] fusing Gecko leads ( was Re: 2 Fried G210's in a single day :-( Alan Marconett KM6VV 2002-05-04 11:23:46 UTC Re: [CAD_CAM_EDM_DRO] fusing Gecko leads ( was Re: 2 Fried G210's in a single day :-( Nicolas Benezan 2002-05-06 09:43:29 UTC Re: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( pavel59 2002-05-06 16:12:02 UTC Re: 2 Fried G210's in a single day :-( RC 2002-05-06 16:13:00 UTC Re: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( dave_ace_me 2002-05-06 16:43:06 UTC Re: 2 Fried G210's in a single day :-( studleylee 2002-05-06 17:16:48 UTC Re: 2 Fried G210's in a single day :-( Tim Goldstein 2002-05-06 18:33:11 UTC RE: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( pavel59 2002-05-07 01:21:01 UTC Re: 2 Fried G210's in a single day :-( dave_ace_me 2002-05-07 04:17:42 UTC good ideas ( was Re: 2 Fried G210's in a single day :-( dave_ace_me 2002-05-07 04:30:55 UTC more data ( Re: 2 Fried G210's in a single day :-( pavel59 2002-05-07 05:23:20 UTC more data ( Re: 2 Fried G210's in a single day :-( turbulatordude 2002-05-07 05:43:18 UTC more data ( Re: 2 Fried G210's in a single day :-( Nicolas Benezan 2002-05-07 06:07:33 UTC Re: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( Tim Goldstein 2002-05-07 09:15:04 UTC Re: [CAD_CAM_EDM_DRO] more data ( Re: 2 Fried G210's in a single day :-( keongsan 2002-05-07 19:41:35 UTC Re: 2 Fried G210's in a single day :-( keongsan 2002-05-07 19:55:06 UTC more data ( Re: 2 Fried G210's in a single day :-( mariss92705 2002-05-07 19:59:40 UTC more data ( Re: 2 Fried G210's in a single day :-( turbulatordude 2002-05-08 04:07:15 UTC more data ( Re: 2 Fried G210's in a single day :-( beer@s... 2002-05-08 10:55:35 UTC Re: Re: 2 Fried G210's in a single day :-( mariss92705 2002-05-08 12:48:39 UTC Re: 2 Fried G210's in a single day :-( JanRwl@A... 2002-05-08 16:40:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: 2 Fried G210's in a single day :-( Jon Elson 2002-05-08 22:13:06 UTC Re: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-( mariss92705 2002-05-09 07:05:26 UTC Re: 2 Fried G210's in a single day :-( Jon Elson 2002-05-09 22:50:27 UTC Re: [CAD_CAM_EDM_DRO] Re: 2 Fried G210's in a single day :-(