Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
Posted by
R Rogers
on 2005-01-30 19:30:51 UTC
I thought the price diff was like 30 or 40 dollars.
braidmeister <braidmeister@...> wrote:
Ron,
Maybe I am missing something here, BUT...Why would I disassemble a
NEW motor and machine the shaft down to 1/4"???
US Digital makes an encoder for a 5/8" shaft. I'm not going to hack
apart and machine a new motor so that I can 'save' $10 on an encoder!
-Brady
--- In CAD_CAM_EDM_DRO@yahoogroups.com, R Rogers
wrote:
shop or a buddy with a lathe. Have them turn it down to 1/4". Not
that big of deal. The shafts would most likely be soft. Mine are
allen bradleys and they aren't hardened. Even if they are they could
use carbide inserts. Would save a whole lot of headaches. Mounting
the encoder is no big issue either, it's not like the balance wheel
of a waltham watch. If you can get the wheel mounted and encoder
buckled down and aligned, it will work fine. They arent that fussy.
it if you have trouble.
there, for OT subjects, that are not allowed on the CCED list.
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
braidmeister <braidmeister@...> wrote:
Ron,
Maybe I am missing something here, BUT...Why would I disassemble a
NEW motor and machine the shaft down to 1/4"???
US Digital makes an encoder for a 5/8" shaft. I'm not going to hack
apart and machine a new motor so that I can 'save' $10 on an encoder!
-Brady
--- In CAD_CAM_EDM_DRO@yahoogroups.com, R Rogers
wrote:
> Brady, I forgot you are grappling with the 5/8" shaft out the backissue. Pull the motors apart and take the armature to a local machine
shop or a buddy with a lathe. Have them turn it down to 1/4". Not
that big of deal. The shafts would most likely be soft. Mine are
allen bradleys and they aren't hardened. Even if they are they could
use carbide inserts. Would save a whole lot of headaches. Mounting
the encoder is no big issue either, it's not like the balance wheel
of a waltham watch. If you can get the wheel mounted and encoder
buckled down and aligned, it will work fine. They arent that fussy.
>wrote:
> Ron
>
> braidmeister
>Are
>
> I've been trying to nail down an encoder for my BOSS conversion.
> there any situations where I would need a 3rd or Index channel?timg@k...
>
> -Brady
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> Moderator: pentam@c... indigo_red@q... davemucha@j... [Moderators]aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
it if you have trouble.
> http://www.metalworking.com/news_servers.htmla sister site to the CCED group, as many of the same members are
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
there, for OT subjects, that are not allowed on the CCED list.
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> billAddresses:
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Discussion Thread
braidmeister
2005-01-30 18:38:54 UTC
Encoder Indexer Option
Stephen Wille Padnos
2005-01-30 18:53:32 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
R Rogers
2005-01-30 18:53:34 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
R Rogers
2005-01-30 19:08:51 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
Stephen Wille Padnos
2005-01-30 19:15:01 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
braidmeister
2005-01-30 19:15:59 UTC
Re: Encoder Indexer Option
R Rogers
2005-01-30 19:20:56 UTC
Automobile starter motor as servo??
R Rogers
2005-01-30 19:27:46 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
Luke1027
2005-01-30 19:29:36 UTC
Re: [CAD_CAM_EDM_DRO] Automobile starter motor as servo??
R Rogers
2005-01-30 19:30:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
Luke1027
2005-01-30 19:33:53 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
Stephen Wille Padnos
2005-01-30 19:50:11 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
R Rogers
2005-01-30 19:59:09 UTC
Re: [CAD_CAM_EDM_DRO] Encoder Indexer Option
turbulatordude
2005-01-30 20:20:01 UTC
Re: Encoder Indexer Option --- opening up steppers.......and modfying shafts...
Scott Ellis
2005-01-30 21:33:44 UTC
Re: [CAD_CAM_EDM_DRO] Automobile starter motor as servo??
braidmeister
2005-01-30 21:37:44 UTC
Re: Encoder Indexer Option --- opening up steppers.......and modfying shafts...
Jon Elson
2005-01-30 21:48:20 UTC
Re: [CAD_CAM_EDM_DRO] Automobile starter motor as servo??
Marv Frankel
2005-01-31 03:21:34 UTC
Re: Encoder Indexer Option --- opening up steppers.......and modfying shafts...
Andy Wander
2005-01-31 04:43:25 UTC
RE: [CAD_CAM_EDM_DRO] Encoder Indexer Option
Polaraligned
2005-01-31 04:49:52 UTC
Re: Encoder Indexer Option
turbulatordude
2005-01-31 06:52:59 UTC
Re: Encoder Indexer Option --- opening up steppers.......and modfying shafts...
R Rogers
2005-01-31 07:25:09 UTC
Re: [CAD_CAM_EDM_DRO] Automobile starter motor as servo??
braidmeister
2005-01-31 07:30:19 UTC
Re: Encoder Indexer Option
R Rogers
2005-01-31 07:32:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option --- opening up steppers.......and modfying shafts...
Andy Wander
2005-01-31 07:47:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option --- opening up steppers.......and modfying shafts...
Polaraligned
2005-01-31 08:23:26 UTC
Re: Encoder Indexer Option
Stephen Wille Padnos
2005-01-31 08:30:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
Stephen Wille Padnos
2005-01-31 08:31:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
braidmeister
2005-01-31 08:32:51 UTC
Re: Encoder Indexer Option
braidmeister
2005-01-31 08:42:23 UTC
Re: Encoder Indexer Option
Stephen Wille Padnos
2005-01-31 08:49:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
John Rouche
2005-01-31 08:51:15 UTC
Re: Encoder Indexer Option
braidmeister
2005-01-31 09:01:09 UTC
Re: Encoder Indexer Option
Polaraligned
2005-01-31 11:04:09 UTC
Re: Encoder Indexer Option
braidmeister
2005-01-31 11:16:08 UTC
Re: Encoder Indexer Option
Polaraligned
2005-01-31 11:36:30 UTC
Re: Encoder Indexer Option
braidmeister
2005-01-31 11:45:53 UTC
Re: Encoder Indexer Option
Stephen Wille Padnos
2005-01-31 12:44:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
Terrenoire, Adrien L
2005-01-31 13:00:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
David A. Frantz
2005-01-31 14:10:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Encoder Indexer Option
braidmeister
2005-01-31 14:43:34 UTC
Re: Encoder Indexer Option
cnc_4_me
2005-01-31 17:33:36 UTC
Re: Encoder Indexer Option
braidmeister
2005-01-31 18:07:28 UTC
Re: Encoder Indexer Option
cnc_4_me
2005-01-31 19:10:35 UTC
Re: Encoder Indexer Option
Stephan Kotze
2005-02-01 00:36:14 UTC
Re: Automobile starter motor as servo??
R Rogers
2005-02-01 06:13:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Automobile starter motor as servo??
Jon Elson
2005-02-01 09:59:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Automobile starter motor as servo??
Brian
2005-02-01 16:40:19 UTC
Re: [CAD_CAM_EDM_DRO] Automobile starter motor as servo??