RE: [CAD_CAM_EDM_DRO] I'm curious
Posted by
Randy Brewer
on 2005-07-20 18:17:06 UTC
I define if from the Control Software stand point, mostly. If the drive
faults because it didn't move would Mach have any idea where it was?
If you tip into the position error neither the Gecko nor Mach attempts to
makeup for the error. So long at you stay below the magic 128 both are
happy.
To me closed loop implies that there is some attempt to correct for errors..
But like I said Mach and Geckos work well. I use both.
I've stopped 11,612 spam and fraud messages. You can too!
One month FREE spam and fraud protection at
http://www.cloudmark.com/safetybarsig/?rc=7j9c4
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Erie Patsellis
Sent: Wednesday, July 20, 2005 7:22 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] I'm curious
Easy question Randy,
Define closed loop.
erie
Randy Brewer wrote:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
faults because it didn't move would Mach have any idea where it was?
If you tip into the position error neither the Gecko nor Mach attempts to
makeup for the error. So long at you stay below the magic 128 both are
happy.
To me closed loop implies that there is some attempt to correct for errors..
But like I said Mach and Geckos work well. I use both.
I've stopped 11,612 spam and fraud messages. You can too!
One month FREE spam and fraud protection at
http://www.cloudmark.com/safetybarsig/?rc=7j9c4
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Erie Patsellis
Sent: Wednesday, July 20, 2005 7:22 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] I'm curious
Easy question Randy,
Define closed loop.
erie
Randy Brewer wrote:
>I did and still do not see where it is closed loop. Mach is not now andAddresses:
>will not ever be closed loop.
>The Gecko being closed does not make the control system closed....
>
>
>
>I've stopped 11,608 spam and fraud messages. You can too!
>One month FREE spam and fraud protection at
>http://www.cloudmark.com/safetybarsig/?rc=7j9c4
>
>
>
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
Ron Kline
2005-07-19 20:18:15 UTC
Art machining
yahoo@h...
2005-07-19 22:05:20 UTC
I'm curious
Brian
2005-07-19 22:14:44 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
Jack Hudler
2005-07-20 00:06:09 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
wanliker@a...
2005-07-20 01:14:52 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
turbulatordude
2005-07-20 01:24:53 UTC
Re: I'm curious
mike
2005-07-20 03:46:58 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
R Rogers
2005-07-20 07:04:23 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
David Bloomfield
2005-07-20 07:40:50 UTC
Re: I'm curious
Ted Gregorius
2005-07-20 08:31:37 UTC
Re: I'm curious
Mike
2005-07-20 09:16:52 UTC
Re: I'm curious
Jon Elson
2005-07-20 09:55:27 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
Dan Mauch
2005-07-20 11:02:45 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
Randy Brewer
2005-07-20 13:49:03 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 14:03:39 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
yahoo@h...
2005-07-20 14:07:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
Jack Hudler
2005-07-20 14:08:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
yahoo@h...
2005-07-20 14:08:45 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 14:09:02 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 14:11:24 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Jack Hudler
2005-07-20 14:30:16 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 14:30:21 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
David A. Frantz
2005-07-20 14:31:03 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 14:55:16 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Randy Brewer
2005-07-20 15:16:03 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
R Rogers
2005-07-20 15:36:02 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Jack
2005-07-20 16:08:38 UTC
Re: I'm curious
Randy Brewer
2005-07-20 16:31:16 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Beau Beaufait
2005-07-20 17:15:59 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
Erie Patsellis
2005-07-20 17:20:14 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
Erie Patsellis
2005-07-20 17:22:21 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
Ron Yost
2005-07-20 17:36:00 UTC
OT: X-Cad = Alibre Design Xpress
Randy Brewer
2005-07-20 18:17:06 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 18:36:34 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Jon Elson
2005-07-20 18:47:53 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 19:39:49 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Randy Brewer
2005-07-20 19:51:26 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
John Delaney
2005-07-20 20:46:52 UTC
Re: I'm curious
Erie Patsellis
2005-07-20 21:23:59 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 21:42:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
JanRwl@A...
2005-07-20 21:43:49 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
David A. Frantz
2005-07-20 22:19:35 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
David A. Frantz
2005-07-20 22:33:12 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-20 22:43:15 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
mpictor
2005-07-20 23:11:11 UTC
Re: I'm curious
yahoo@h...
2005-07-20 23:41:02 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Doug M
2005-07-21 06:44:35 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
Doug M
2005-07-21 06:47:15 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
caedave
2005-07-21 06:55:27 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
caedave
2005-07-21 08:02:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
turbulatordude
2005-07-21 08:11:55 UTC
Re: I'm curious
caedave
2005-07-21 08:17:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
Alan Marconett
2005-07-21 09:06:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
David A. Frantz
2005-07-21 09:08:59 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
David A. Frantz
2005-07-21 09:16:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
Jon Elson
2005-07-21 10:10:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
David A. Frantz
2005-07-21 10:21:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
Jon Elson
2005-07-21 10:22:06 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
yahoo@h...
2005-07-21 11:52:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
yahoo@h...
2005-07-21 12:05:26 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Jack Hudler
2005-07-21 12:11:39 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
Andy Wander
2005-07-21 12:23:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
yahoo@h...
2005-07-21 12:33:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
Alan Marconett
2005-07-21 12:44:11 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
Ted Gregorius
2005-07-21 12:54:25 UTC
Re: I'm curious
JanRwl@A...
2005-07-21 13:38:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
caedave
2005-07-21 14:32:22 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
caedave
2005-07-21 15:01:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
caedave
2005-07-21 15:32:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
John Delaney
2005-07-21 15:34:06 UTC
Re: I'm curious
caedave
2005-07-21 15:53:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
David A. Frantz
2005-07-21 20:51:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
art
2005-07-21 20:55:17 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
David A. Frantz
2005-07-21 21:03:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
Jon Elson
2005-07-21 22:25:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
Jon Elson
2005-07-21 22:31:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
Jon Elson
2005-07-21 22:33:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: I'm curious
Jon Elson
2005-07-21 22:38:24 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
turbulatordude
2005-07-21 23:49:03 UTC
Re: I'm curious
Jack Hudler
2005-07-22 00:03:42 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Alex Holden
2005-07-22 01:02:53 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
R Rogers
2005-07-22 04:36:59 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious, Please read...
R Rogers
2005-07-22 04:58:43 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious, Please read...
art
2005-07-22 05:03:08 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
art
2005-07-22 05:06:03 UTC
Re: [CAD_CAM_EDM_DRO] I'm curious
Tim McCoy
2005-07-22 10:17:04 UTC
Re: I'm curious
Jack Hudler
2005-07-22 12:19:43 UTC
RE: [CAD_CAM_EDM_DRO] I'm curious
Jack Hudler
2005-07-22 13:21:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: I'm curious
John Delaney
2005-07-22 20:04:40 UTC
Re: I'm curious, Please read...
Mariss Freimanis
2005-07-23 19:07:10 UTC
Re: I'm curious