Re: [CAD_CAM_EDM_DRO] Re: Can CNCPro users provide some input?

>
>Ballendo
>
>You are absolutely right if you need those z's doing different things
>during a program. But you could call the extra one a, b, c and parallel
>the commands.
>
>If you are just running the same z shape using multiple spindles or
>torches and all you want to do is drop one or more ope-loop units
>into the work, this could easily be handled by some external chips and
>I/O. In the EMC, that's what tkio and iosh are for.
>
>Ray
>
>From: ballendo@...
>
>Jon,
>
>Yes, that is correct.
>
>What gets ya is the details... In this case, the EMC architecture was
>not designed with multiple linear Z axes in mind, so it is more than
>a trivial task. At least, that's what Tom K (might have been Fred P)
>said awhile back...
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>