Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???

> The problem with CNCPro is it is not DeckNC, this is the
> DeskNC/Gecko conference. All other questions will be ignored
> or answered with DeskNC and Gecko references. Forget CNCPro!
> Go with DeskNC and Gecko! "What did you dream? Its alright we
> told you what to dream!"
>
> John
>
> --- In CAD_CAM_EDM_DRO@y..., "Tom Murray" <thomasm923@a...> wrote:
> > I'd like to bring to light a fact that is somewhat buried on the
> > Yeager Automation (CNC Pro) website...
> >
> > Tim Goldstein wrote concerning EMC pulse rates:
> >
> > "This works out to 10,000 steps per inch times 180 ipm = 1,800,000
> > steps per minute divided by 60 = 30,000 steps per second."
> >
> > Tim stated that this rate is achieved with an AMD K-6 450 MHZ
> system.
> >
> > From the CNC Pro website:
> >
> > "5) How fast can CNC Pro run my machine?
> >
> > This speed with which CNC Pro can emit steps is based on the
> > processor speed of the computer. Here is what you can expect:
> 25mhz
> > 486 will send about 5000 steps/sec., P120 will send about 30000
> > steps/sec, P266 will send about 60000 steps/sec, and a P450 will
> send
> > about 100000 steps/sec (!*). In order to get these step output
> rates
> > you must have the setting "Update Display After Move Only" set
> > to "ON"."
> >
> > * my comment
> >
> > -Tom Murray
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/