Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???

Friends,

I would like to just insert this thought. Personally, I am not astute
enough to be able to follow the speed thread and the other very intense
technical stuff as closely as I would like, however, I realize that those
folks who are talking about proccessor speed etc., are working on devices
that will help us all in our shops. I am enjoying seeing how stuff gets
developed. This is all very exciting to me. Keep on talking. (And, I am
learning stuff from even those posts. Hopefully I will be able to
assimilate enough to make better contributions in the future.

Tom Eldredge

----- Original Message -----
From: Tim Goldstein <timg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, April 19, 2001 3:43 PM
Subject: RE: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???


> The continuation of a thread is dependent upon the interest of the list
> members. There is no one that is dictating what is discussed and what get
> replied to as long as it is somewhat relevant. If a product seems to get a
> lot of endorsement on this list it is because the poster feels it is a
good
> product. If the same products keep turning up that would likely indicate
> that the item is well received and the list members feel others would find
> it useful also.
>
> Point is, if you don't like what is being discussed or you think another
> solution would be better than say so. If people agree than you know your
> suggestion is being well received. If people disagree or the thread dies
> than figure you need to consider that the suggestion is not popular.
>
> Tim
> [Denver, CO]
>
> > Tom,
> > I was not attacking you! I was just expressing my overall
> > disapointment with this conference. All new subjects go off on
> > dead end tagents others end up as Gecko or EMC threads.
> >
> > John
> >
> > FAQ: http://www.ktmarketing.com/faq.html
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>