CAD CAM EDM DRO - Yahoo Group Archive

Re: FS: X-Y Table

on 2001-04-17 15:16:20 UTC
Hi,

You really should run the Oregon Microsystems (MD-10 I believe)
drives between 24VDC to 60VDC. I designed them.

Mariss


--- In CAD_CAM_EDM_DRO@y..., "The AntiYuppie" <sloboyko@m...> wrote:
> I have sold a few of these to people on this list, and they have
been
> pleased. This is an older model ('95?) NEAT/Kollmorgen table with
~6"
> of travel on each axis. I don't think I will be getting more
because
> I beleive the people I got them from figured out what they are!
> Details and a link to further specs are at:
>
> 8080geek.freeservers.com/xy.htm
>
> Included are Oregon Microsystems microstepping controller/drivers
> with 10 ms/per step. I've tested them out with an AT power supply
at
> 12 volts (they are designed to run at 24 -60 volts) and the
> controller/drivers and motors work properly. I have been told by
> someone else who picked up a few surplus that these were used at
IBM
> for microinspection, which seems to explain why they are so clean.
>
> If you are interested, please contact me off list. Price is 300 +
> shipping (which is not cheap, ship weight is ~37 pounds with the
> steel "tool" plate). I am in KY. I will pay for packing, which has
> run about $12.00.
>
> If you've contacted me before about any more available, you will
get
> first crack, but for some reason my "in" box has become corrupted
and
> I'm having a hard time searching my back email.
>
>
>
> -Steve Loboyko
> sloboyko@m...

Discussion Thread

The AntiYuppie 2001-04-16 22:08:51 UTC FS: X-Y Table mariss92705@y... 2001-04-17 15:16:20 UTC Re: FS: X-Y Table Tim Goldstein 2001-04-17 20:21:14 UTC RE: [CAD_CAM_EDM_DRO] Re: FS: X-Y Table mariss92705@y... 2001-04-17 21:07:04 UTC Re: FS: X-Y Table Tim Goldstein 2001-04-17 21:28:32 UTC RE: [CAD_CAM_EDM_DRO] Re: FS: X-Y Table Tim Goldstein 2001-04-17 21:55:50 UTC DeskNC Windows version Dan Mauch 2001-04-18 06:49:37 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tom Eldredge 2001-04-18 06:59:43 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tim Goldstein 2001-04-18 07:02:30 UTC RE: [CAD_CAM_EDM_DRO] DeskNC Windows version Dan Mauch 2001-04-18 08:05:39 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Dan Mauch 2001-04-18 08:07:01 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 10:23:59 UTC Re: DeskNC Windows version Tim Goldstein 2001-04-18 10:42:30 UTC RE: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version afogassa@y... 2001-04-18 10:55:52 UTC Re: DeskNC Windows version Tim Goldstein 2001-04-18 11:05:37 UTC RE: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Alan Marconett KM6VV 2001-04-18 11:22:06 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 11:37:16 UTC Re: DeskNC Windows version Art Fenerty 2001-04-18 12:25:20 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tim Goldstein 2001-04-18 12:51:18 UTC RE: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 14:50:40 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Art Fenerty 2001-04-18 15:09:51 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Larry Edington 2001-04-18 15:12:52 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tim Goldstein 2001-04-18 15:35:23 UTC RE: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 15:48:03 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 16:07:04 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tim Goldstein 2001-04-18 16:20:02 UTC RE: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 16:24:07 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tim Goldstein 2001-04-18 17:00:31 UTC RE: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 17:10:53 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Art Fenerty 2001-04-18 17:16:03 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tim Goldstein 2001-04-18 17:37:16 UTC RE: [CAD_CAM_EDM_DRO] DeskNC Windows version Art Fenerty 2001-04-18 17:44:56 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Carol & Jerry Jankura 2001-04-18 17:58:45 UTC RE: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 18:26:01 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Larry Edington 2001-04-18 18:27:08 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Larry Edington 2001-04-18 18:43:23 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Alan Marconett KM6VV 2001-04-18 18:49:25 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tom Murray 2001-04-18 20:54:30 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? Ray 2001-04-18 21:36:52 UTC RE: DeskNC Windows version Matt Shaver 2001-04-18 23:45:35 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version kleinbauer@j... 2001-04-19 04:32:39 UTC Re: DeskNC Windows version kleinbauer@j... 2001-04-19 05:11:29 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? Tom Murray 2001-04-19 06:27:27 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? Fred Smith 2001-04-19 06:28:12 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? Joe Vicars 2001-04-19 06:36:56 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? Carlos Guillermo 2001-04-19 06:38:10 UTC OT Re: DeskNC - CNC Pro 3x as fast as EMC??? Joe Vicars 2001-04-19 06:52:04 UTC Re: [CAD_CAM_EDM_DRO] OT Re: DeskNC - CNC Pro 3x as fast as EMC??? kleinbauer@j... 2001-04-19 07:06:24 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? kleinbauer@j... 2001-04-19 07:22:17 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? kleinbauer@j... 2001-04-19 07:24:53 UTC OT Re: DeskNC - CNC Pro 3x as fast as EMC??? stratton@m... 2001-04-19 07:34:58 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? Joe Vicars 2001-04-19 07:39:33 UTC Re: [CAD_CAM_EDM_DRO] OT Re: DeskNC - CNC Pro 3x as fast as EMC??? kleinbauer@j... 2001-04-19 08:53:30 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? kleinbauer@j... 2001-04-19 08:57:21 UTC OT Re: DeskNC - CNC Pro 3x as fast as EMC??? Tim Goldstein 2001-04-19 08:58:59 UTC RE: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? kleinbauer@j... 2001-04-19 09:30:14 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? Art Fenerty 2001-04-19 10:38:36 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? Paul 2001-04-19 12:32:30 UTC All quiet on the EMC front ??? Jon Elson 2001-04-19 13:11:34 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Jon Elson 2001-04-19 13:18:32 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version Tim Goldstein 2001-04-19 13:44:38 UTC RE: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? Doug Harrison 2001-04-19 14:26:59 UTC Re: [CAD_CAM_EDM_DRO] DeskNC Windows version beer@s... 2001-04-19 15:19:34 UTC Re: DeskNC Windows version IMService 2001-04-19 15:21:30 UTC Re: All quiet on the EMC front ??? wanliker@a... 2001-04-19 15:41:19 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? ballendo@y... 2001-04-19 20:45:12 UTC Re: DeskNC Windows version mariss92705@y... 2001-04-19 21:14:59 UTC Re: DeskNC Windows version wanliker@a... 2001-04-19 23:26:04 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Matt Shaver 2001-04-20 00:02:57 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Tom Eldredge 2001-04-20 04:08:40 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? kleinbauer@j... 2001-04-20 04:21:47 UTC Re: DeskNC Windows version Ray 2001-04-20 06:17:58 UTC Re: DeskNC Windows version Tom Eldredge 2001-04-20 07:41:25 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? stratton@m... 2001-04-20 07:52:09 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version wanliker@a... 2001-04-20 08:58:00 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version kleinbauer@j... 2001-04-20 09:44:18 UTC Re: DeskNC Windows version wanliker@a... 2001-04-20 10:34:20 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version wanliker@a... 2001-04-20 10:36:08 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version kleinbauer@j... 2001-04-20 11:04:06 UTC Re: DeskNC Windows version wanliker@a... 2001-04-20 11:11:52 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Alan Marconett KM6VV 2001-04-20 12:18:38 UTC Re: DeskNC - CNC Pro 3x as fast as EMC??? wanliker@a... 2001-04-20 12:35:38 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? Carol & Jerry Jankura 2001-04-20 12:54:57 UTC RE: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC??? Alan Marconett KM6VV 2001-04-20 15:54:16 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Larry Edington 2001-04-20 17:53:39 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version ballendo@y... 2001-04-21 02:14:24 UTC Re: DeskNC Windows version kleinbauer@j... 2001-04-21 04:51:11 UTC Re: DeskNC Windows version wanliker@a... 2001-04-21 07:09:44 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Tom Eldredge 2001-04-22 08:58:46 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Alan Marconett KM6VV 2001-04-22 20:57:58 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Larry Edington 2001-04-22 23:15:38 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Carol & Jerry Jankura 2001-04-23 05:39:37 UTC RE: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version Tom Eldredge 2001-04-24 06:23:34 UTC Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version