FS: X-Y Table
Posted by
The AntiYuppie
on 2001-04-16 22:08:51 UTC
I have sold a few of these to people on this list, and they have been
pleased. This is an older model ('95?) NEAT/Kollmorgen table with ~6"
of travel on each axis. I don't think I will be getting more because
I beleive the people I got them from figured out what they are!
Details and a link to further specs are at:
8080geek.freeservers.com/xy.htm
Included are Oregon Microsystems microstepping controller/drivers
with 10 ms/per step. I've tested them out with an AT power supply at
12 volts (they are designed to run at 24 -60 volts) and the
controller/drivers and motors work properly. I have been told by
someone else who picked up a few surplus that these were used at IBM
for microinspection, which seems to explain why they are so clean.
If you are interested, please contact me off list. Price is 300 +
shipping (which is not cheap, ship weight is ~37 pounds with the
steel "tool" plate). I am in KY. I will pay for packing, which has
run about $12.00.
If you've contacted me before about any more available, you will get
first crack, but for some reason my "in" box has become corrupted and
I'm having a hard time searching my back email.
-Steve Loboyko
sloboyko@...
pleased. This is an older model ('95?) NEAT/Kollmorgen table with ~6"
of travel on each axis. I don't think I will be getting more because
I beleive the people I got them from figured out what they are!
Details and a link to further specs are at:
8080geek.freeservers.com/xy.htm
Included are Oregon Microsystems microstepping controller/drivers
with 10 ms/per step. I've tested them out with an AT power supply at
12 volts (they are designed to run at 24 -60 volts) and the
controller/drivers and motors work properly. I have been told by
someone else who picked up a few surplus that these were used at IBM
for microinspection, which seems to explain why they are so clean.
If you are interested, please contact me off list. Price is 300 +
shipping (which is not cheap, ship weight is ~37 pounds with the
steel "tool" plate). I am in KY. I will pay for packing, which has
run about $12.00.
If you've contacted me before about any more available, you will get
first crack, but for some reason my "in" box has become corrupted and
I'm having a hard time searching my back email.
-Steve Loboyko
sloboyko@...
Discussion Thread
The AntiYuppie
2001-04-16 22:08:51 UTC
FS: X-Y Table
mariss92705@y...
2001-04-17 15:16:20 UTC
Re: FS: X-Y Table
Tim Goldstein
2001-04-17 20:21:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: FS: X-Y Table
mariss92705@y...
2001-04-17 21:07:04 UTC
Re: FS: X-Y Table
Tim Goldstein
2001-04-17 21:28:32 UTC
RE: [CAD_CAM_EDM_DRO] Re: FS: X-Y Table
Tim Goldstein
2001-04-17 21:55:50 UTC
DeskNC Windows version
Dan Mauch
2001-04-18 06:49:37 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tom Eldredge
2001-04-18 06:59:43 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tim Goldstein
2001-04-18 07:02:30 UTC
RE: [CAD_CAM_EDM_DRO] DeskNC Windows version
Dan Mauch
2001-04-18 08:05:39 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Dan Mauch
2001-04-18 08:07:01 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 10:23:59 UTC
Re: DeskNC Windows version
Tim Goldstein
2001-04-18 10:42:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
afogassa@y...
2001-04-18 10:55:52 UTC
Re: DeskNC Windows version
Tim Goldstein
2001-04-18 11:05:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 11:22:06 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 11:37:16 UTC
Re: DeskNC Windows version
Art Fenerty
2001-04-18 12:25:20 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tim Goldstein
2001-04-18 12:51:18 UTC
RE: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 14:50:40 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Art Fenerty
2001-04-18 15:09:51 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Larry Edington
2001-04-18 15:12:52 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tim Goldstein
2001-04-18 15:35:23 UTC
RE: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 15:48:03 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 16:07:04 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tim Goldstein
2001-04-18 16:20:02 UTC
RE: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 16:24:07 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tim Goldstein
2001-04-18 17:00:31 UTC
RE: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 17:10:53 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Art Fenerty
2001-04-18 17:16:03 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tim Goldstein
2001-04-18 17:37:16 UTC
RE: [CAD_CAM_EDM_DRO] DeskNC Windows version
Art Fenerty
2001-04-18 17:44:56 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Carol & Jerry Jankura
2001-04-18 17:58:45 UTC
RE: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 18:26:01 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Larry Edington
2001-04-18 18:27:08 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Larry Edington
2001-04-18 18:43:23 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Alan Marconett KM6VV
2001-04-18 18:49:25 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tom Murray
2001-04-18 20:54:30 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
Ray
2001-04-18 21:36:52 UTC
RE: DeskNC Windows version
Matt Shaver
2001-04-18 23:45:35 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
kleinbauer@j...
2001-04-19 04:32:39 UTC
Re: DeskNC Windows version
kleinbauer@j...
2001-04-19 05:11:29 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
Tom Murray
2001-04-19 06:27:27 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
Fred Smith
2001-04-19 06:28:12 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
Joe Vicars
2001-04-19 06:36:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
Carlos Guillermo
2001-04-19 06:38:10 UTC
OT Re: DeskNC - CNC Pro 3x as fast as EMC???
Joe Vicars
2001-04-19 06:52:04 UTC
Re: [CAD_CAM_EDM_DRO] OT Re: DeskNC - CNC Pro 3x as fast as EMC???
kleinbauer@j...
2001-04-19 07:06:24 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
kleinbauer@j...
2001-04-19 07:22:17 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
kleinbauer@j...
2001-04-19 07:24:53 UTC
OT Re: DeskNC - CNC Pro 3x as fast as EMC???
stratton@m...
2001-04-19 07:34:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
Joe Vicars
2001-04-19 07:39:33 UTC
Re: [CAD_CAM_EDM_DRO] OT Re: DeskNC - CNC Pro 3x as fast as EMC???
kleinbauer@j...
2001-04-19 08:53:30 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
kleinbauer@j...
2001-04-19 08:57:21 UTC
OT Re: DeskNC - CNC Pro 3x as fast as EMC???
Tim Goldstein
2001-04-19 08:58:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
kleinbauer@j...
2001-04-19 09:30:14 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
Art Fenerty
2001-04-19 10:38:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
Paul
2001-04-19 12:32:30 UTC
All quiet on the EMC front ???
Jon Elson
2001-04-19 13:11:34 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Jon Elson
2001-04-19 13:18:32 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
Tim Goldstein
2001-04-19 13:44:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
Doug Harrison
2001-04-19 14:26:59 UTC
Re: [CAD_CAM_EDM_DRO] DeskNC Windows version
beer@s...
2001-04-19 15:19:34 UTC
Re: DeskNC Windows version
IMService
2001-04-19 15:21:30 UTC
Re: All quiet on the EMC front ???
wanliker@a...
2001-04-19 15:41:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
ballendo@y...
2001-04-19 20:45:12 UTC
Re: DeskNC Windows version
mariss92705@y...
2001-04-19 21:14:59 UTC
Re: DeskNC Windows version
wanliker@a...
2001-04-19 23:26:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Matt Shaver
2001-04-20 00:02:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Tom Eldredge
2001-04-20 04:08:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
kleinbauer@j...
2001-04-20 04:21:47 UTC
Re: DeskNC Windows version
Ray
2001-04-20 06:17:58 UTC
Re: DeskNC Windows version
Tom Eldredge
2001-04-20 07:41:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
stratton@m...
2001-04-20 07:52:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
wanliker@a...
2001-04-20 08:58:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
kleinbauer@j...
2001-04-20 09:44:18 UTC
Re: DeskNC Windows version
wanliker@a...
2001-04-20 10:34:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
wanliker@a...
2001-04-20 10:36:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
kleinbauer@j...
2001-04-20 11:04:06 UTC
Re: DeskNC Windows version
wanliker@a...
2001-04-20 11:11:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Alan Marconett KM6VV
2001-04-20 12:18:38 UTC
Re: DeskNC - CNC Pro 3x as fast as EMC???
wanliker@a...
2001-04-20 12:35:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
Carol & Jerry Jankura
2001-04-20 12:54:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskNC - CNC Pro 3x as fast as EMC???
Alan Marconett KM6VV
2001-04-20 15:54:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Larry Edington
2001-04-20 17:53:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
ballendo@y...
2001-04-21 02:14:24 UTC
Re: DeskNC Windows version
kleinbauer@j...
2001-04-21 04:51:11 UTC
Re: DeskNC Windows version
wanliker@a...
2001-04-21 07:09:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Tom Eldredge
2001-04-22 08:58:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Alan Marconett KM6VV
2001-04-22 20:57:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Larry Edington
2001-04-22 23:15:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Carol & Jerry Jankura
2001-04-23 05:39:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version
Tom Eldredge
2001-04-24 06:23:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: DeskNC Windows version