Re: Moog makes it home
Posted by
blown_mgb_v8 <jblackwood5@i...
on 2003-02-03 19:11:07 UTC
> The biggest hurdles are fastening & aligning the nut brackets tothe
> underside of the table and the saddle.worked from
>
> On the knee, I removed the cylinder mount extension casting and
> the knee casting flat face to mount the 'Y'.keep the
>
>
> The 'X' clamping distance is only 24" or so, so I took it off to
> metal strip from catching on the cylinders inside the clamp, amongother
> things.Interesting. And you say nearly 38" is possible? That's impressive,
>
> - Keith
I could live without the hydraulic clamps. Don't suppose there'd be
any reason why the saddle couldn't be drilled and tapped for the
more conventional screw type clamps on the x axis, though the y
might be trickier.
Got a question about that y actuator. In the manual it looks like
the thing is supported from a piece that extends down and forwards
from the saddle, inside the knee cavity. If this is correct, could
that piece be used for the nut attachment point? Looks like it might
have to be shortened if the knee extension is to be eliminated, but
does that look to you like something that would work?
Other things to think about of course are the speed control and gear
change mechanisms. As long as they still work properly though I
don't really expect any real complications there. It'd be nice to
streamline all that stuff piled up on top of the head though. I
really don't think I'll be all that much interested in keeping the
big square fiberglass covers.
Jim
Discussion Thread
blown_mgb_v8 <jblackwood5@i...
2003-01-31 11:46:23 UTC
Moog makes it home
jmkasunich <jmkasunich@y...
2003-01-31 14:23:24 UTC
Re: Moog makes it home
Bill Higdon
2003-01-31 19:48:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-02 07:13:25 UTC
Re: Moog makes it home
Keith Rumley
2003-02-03 08:54:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-03 09:57:15 UTC
Re: Moog makes it home
Bill Higdon
2003-02-03 12:53:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog makes it home
Keith Rumley
2003-02-03 13:50:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-03 19:11:07 UTC
Re: Moog makes it home
Keith Rumley
2003-02-03 20:45:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-04 13:52:59 UTC
Re: Moog makes it home
Keith Rumley
2003-02-04 20:34:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-05 07:30:36 UTC
Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-17 21:45:41 UTC
Re: Moog makes it home
Andrew Mawson <andrew@m...
2003-02-18 08:40:49 UTC
Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-18 17:57:09 UTC
Re: Moog makes it home
blown_mgb_v8 <jblackwood5@i...
2003-02-22 18:24:33 UTC
Re: Moog ways are good (makes it home)
Andrew Mawson <andrew@m...
2003-02-23 00:43:33 UTC
Re: Moog ways are good (makes it home)
Jerry Biehler
2003-02-23 06:13:47 UTC
Stepper wiring
Tony Jeffree
2003-02-23 06:17:04 UTC
Re: [CAD_CAM_EDM_DRO] Stepper wiring
ajv2803959 <antonio-ximenez@t...
2003-02-24 07:42:01 UTC
Re: Stepper wiring
blown_mgb_v8 <jblackwood5@i...
2003-02-25 15:04:49 UTC
Re: Moog ways are good (makes it home)
blown_mgb_v8 <jblackwood5@i...
2003-02-27 17:32:28 UTC
Re: Moog: Too much clutter
blown_mgb_v8
2003-03-09 16:29:17 UTC
Re: Moog: Servo for Z?
Jon Elson
2003-03-09 21:48:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog: Servo for Z?
blown_mgb_v8
2003-03-10 17:01:58 UTC
Re: Moog: Servo for Z?
Jon Elson
2003-03-10 23:13:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog: Servo for Z?
blown_mgb_v8
2003-03-12 16:53:01 UTC
Re: Moog: Servo for Z?
Jon Elson
2003-03-12 22:31:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Moog: Servo for Z?
blown_mgb_v8
2003-03-15 20:52:59 UTC
Re: Moog: Servo for Z?
blown_mgb_v8
2003-03-27 20:04:01 UTC
Re: Moog: Where are all the air valves?
Andrew Mawson
2003-03-28 01:27:47 UTC
Re: Moog: Where are all the air valves?
blownmgb_v8
2005-09-03 15:30:17 UTC
Re: Moog: update