Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Posted by
Ron Thompson
on 2011-10-08 08:53:55 UTC
On 10/7/2011 11:18 PM, Johnny wrote:
The price is coming down, due mostly to lower part count designs and
Arduino based electronics.
And print quality is improving due to better software and smaller
extrude size. The more people who get involved, the faster the improvements.
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
There are two kinds of posts on newsgroups.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
http://www.ourcadguy.com/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
> Interesting project Ron. I too have been intrigued by the RepRap andThanks,
> 'til now haven't started because it looked like it might be beyond my
> building/electronics/CAM skill level.
>
> Keep us updated on your webpage additions, I look forward to watching
> the progress!
>
> Thanks again,
> John
> Munds Park, AZ
The price is coming down, due mostly to lower part count designs and
Arduino based electronics.
And print quality is improving due to better software and smaller
extrude size. The more people who get involved, the faster the improvements.
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
There are two kinds of posts on newsgroups.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
http://www.ourcadguy.com/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
Discussion Thread
Ron Thompson
2011-10-06 16:51:50 UTC
Maybe OT, reprap build started
Phil@Y...
2011-10-07 09:31:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Ron Thompson
2011-10-07 09:45:33 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Dan Mauch
2011-10-07 10:23:33 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Ron Thompson
2011-10-07 11:04:27 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-07 12:31:25 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-07 12:39:20 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-07 17:07:18 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
wolfgang
2011-10-07 17:55:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-07 18:09:48 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Johnny
2011-10-08 03:49:29 UTC
Re: Maybe OT, reprap build started
Ron Thompson
2011-10-08 08:53:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Ron Thompson
2011-10-08 08:58:26 UTC
OT New Hackerspace announcement
Mike Payson
2011-10-08 16:37:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
556RECON
2011-10-09 05:42:10 UTC
REPRAP COST EFFECTIVE?
turbulatordude
2011-10-09 08:15:29 UTC
Re: REPRAP COST EFFECTIVE?
Michael Fagan
2011-10-09 08:18:25 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Ron Thompson
2011-10-09 08:22:19 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Kevin Martin
2011-10-09 08:24:50 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-09 10:16:38 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Danny Miller
2011-10-09 10:49:07 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 12:40:25 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Ron Thompson
2011-10-09 13:08:49 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:09:43 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:13:43 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:55:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
556RECON
2011-10-09 14:17:13 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Rehmus
2011-10-09 14:55:34 UTC
Re: Maybe OT, reprap build started
Kevin Martin
2011-10-09 15:46:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Jon Elson
2011-10-09 17:26:27 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Jon Elson
2011-10-09 17:43:06 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 18:38:32 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Low Compression
2011-10-09 19:50:13 UTC
Re: Maybe OT, reprap build started
Danny Miller
2011-10-09 20:55:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Mike Payson
2011-10-09 20:59:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-09 21:42:02 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-09 21:56:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-09 22:13:10 UTC
Re: Maybe OT, reprap build started
Danny Miller
2011-10-09 22:34:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-09 23:11:03 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-09 23:16:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Mike Payson
2011-10-09 23:46:08 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-10 01:02:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:23:47 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:24:21 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:31:56 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 10:28:24 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 10:31:17 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Alan
2011-10-10 10:35:37 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 11:21:40 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 11:34:26 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Alan
2011-10-10 12:08:57 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 12:09:30 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-10 12:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 15:03:37 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 17:47:21 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-10 19:28:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 22:01:42 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 22:19:49 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
David G. LeVine
2011-10-11 10:32:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-11 10:37:18 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
xoethosox
2011-10-11 14:39:15 UTC
Re: Maybe OT, reprap build started
Tom
2011-10-11 15:17:40 UTC
Re: Maybe OT, reprap build started [moderator is not asleep}
Mike Payson
2011-10-11 19:07:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Danny Miller
2011-10-12 00:20:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-12 16:25:06 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-13 08:18:35 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Les Newell
2011-10-13 08:47:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Lester Caine
2011-10-13 09:03:59 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-13 09:52:36 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Dave Halliday
2011-10-13 16:06:11 UTC
OT - open source licencing
imserv1
2011-10-14 06:47:32 UTC
Re: OT - open source licencing
"hanermo" - CNC 6-axis Designs
2011-10-14 07:02:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT - open source licencing
David G. LeVine
2011-10-16 12:10:05 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-16 12:30:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
robin
2011-10-16 17:17:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT - open source licencing