Maybe OT, reprap build started
Posted by
Ron Thompson
on 2011-10-06 16:51:50 UTC
I have started building a Prusa Mendel Reprap 3D printer.
The web pages will include the good, the bad, and the ugly.
I am explaining parts sources and why I chose them along the way. The
first parts have arrived:
http://www.plansandprojects.com/My%20Machines/Prusa_Mendel1/
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
There are two kinds of posts on newsgroups.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
http://www.ourcadguy.com/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
The web pages will include the good, the bad, and the ugly.
I am explaining parts sources and why I chose them along the way. The
first parts have arrived:
http://www.plansandprojects.com/My%20Machines/Prusa_Mendel1/
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
There are two kinds of posts on newsgroups.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
http://www.ourcadguy.com/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
Discussion Thread
Ron Thompson
2011-10-06 16:51:50 UTC
Maybe OT, reprap build started
Phil@Y...
2011-10-07 09:31:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Ron Thompson
2011-10-07 09:45:33 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Dan Mauch
2011-10-07 10:23:33 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Ron Thompson
2011-10-07 11:04:27 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-07 12:31:25 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-07 12:39:20 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-07 17:07:18 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
wolfgang
2011-10-07 17:55:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-07 18:09:48 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Johnny
2011-10-08 03:49:29 UTC
Re: Maybe OT, reprap build started
Ron Thompson
2011-10-08 08:53:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Ron Thompson
2011-10-08 08:58:26 UTC
OT New Hackerspace announcement
Mike Payson
2011-10-08 16:37:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
556RECON
2011-10-09 05:42:10 UTC
REPRAP COST EFFECTIVE?
turbulatordude
2011-10-09 08:15:29 UTC
Re: REPRAP COST EFFECTIVE?
Michael Fagan
2011-10-09 08:18:25 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Ron Thompson
2011-10-09 08:22:19 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Kevin Martin
2011-10-09 08:24:50 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-09 10:16:38 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Danny Miller
2011-10-09 10:49:07 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 12:40:25 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Ron Thompson
2011-10-09 13:08:49 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:09:43 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:13:43 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:55:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
556RECON
2011-10-09 14:17:13 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Rehmus
2011-10-09 14:55:34 UTC
Re: Maybe OT, reprap build started
Kevin Martin
2011-10-09 15:46:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Jon Elson
2011-10-09 17:26:27 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Jon Elson
2011-10-09 17:43:06 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 18:38:32 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Low Compression
2011-10-09 19:50:13 UTC
Re: Maybe OT, reprap build started
Danny Miller
2011-10-09 20:55:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Mike Payson
2011-10-09 20:59:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-09 21:42:02 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-09 21:56:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-09 22:13:10 UTC
Re: Maybe OT, reprap build started
Danny Miller
2011-10-09 22:34:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-09 23:11:03 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-09 23:16:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Mike Payson
2011-10-09 23:46:08 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-10 01:02:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:23:47 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:24:21 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:31:56 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 10:28:24 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 10:31:17 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Alan
2011-10-10 10:35:37 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 11:21:40 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 11:34:26 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Alan
2011-10-10 12:08:57 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 12:09:30 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-10 12:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 15:03:37 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 17:47:21 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-10 19:28:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 22:01:42 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 22:19:49 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
David G. LeVine
2011-10-11 10:32:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-11 10:37:18 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
xoethosox
2011-10-11 14:39:15 UTC
Re: Maybe OT, reprap build started
Tom
2011-10-11 15:17:40 UTC
Re: Maybe OT, reprap build started [moderator is not asleep}
Mike Payson
2011-10-11 19:07:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Danny Miller
2011-10-12 00:20:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-12 16:25:06 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-13 08:18:35 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Les Newell
2011-10-13 08:47:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Lester Caine
2011-10-13 09:03:59 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-13 09:52:36 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Dave Halliday
2011-10-13 16:06:11 UTC
OT - open source licencing
imserv1
2011-10-14 06:47:32 UTC
Re: OT - open source licencing
"hanermo" - CNC 6-axis Designs
2011-10-14 07:02:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT - open source licencing
David G. LeVine
2011-10-16 12:10:05 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-16 12:30:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
robin
2011-10-16 17:17:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT - open source licencing