RE: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Posted by
Kevin Martin
on 2011-10-09 15:46:14 UTC
Do you have specific evidence to this effect, or are you just conjecturing?
Our printer's temperment had nothing to do with the electronics.
-Kevin Martin
the Papertrail Handmade Paper & Book Arts
New Dundee, Ontario
518-884-7123
www.papertrail.ca
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Mike Rehmus
The machines are very poorly design with regard to shielding for the
electronics and filtering for the power supply. That is mostly what causes
them to be temperamental. No surprise, really, everything sits out in the
open.
Our printer's temperment had nothing to do with the electronics.
-Kevin Martin
the Papertrail Handmade Paper & Book Arts
New Dundee, Ontario
518-884-7123
www.papertrail.ca
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Mike Rehmus
The machines are very poorly design with regard to shielding for the
electronics and filtering for the power supply. That is mostly what causes
them to be temperamental. No surprise, really, everything sits out in the
open.
Discussion Thread
Ron Thompson
2011-10-06 16:51:50 UTC
Maybe OT, reprap build started
Phil@Y...
2011-10-07 09:31:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Ron Thompson
2011-10-07 09:45:33 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Dan Mauch
2011-10-07 10:23:33 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Ron Thompson
2011-10-07 11:04:27 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-07 12:31:25 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-07 12:39:20 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-07 17:07:18 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
wolfgang
2011-10-07 17:55:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-07 18:09:48 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Johnny
2011-10-08 03:49:29 UTC
Re: Maybe OT, reprap build started
Ron Thompson
2011-10-08 08:53:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Ron Thompson
2011-10-08 08:58:26 UTC
OT New Hackerspace announcement
Mike Payson
2011-10-08 16:37:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
556RECON
2011-10-09 05:42:10 UTC
REPRAP COST EFFECTIVE?
turbulatordude
2011-10-09 08:15:29 UTC
Re: REPRAP COST EFFECTIVE?
Michael Fagan
2011-10-09 08:18:25 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Ron Thompson
2011-10-09 08:22:19 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Kevin Martin
2011-10-09 08:24:50 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-09 10:16:38 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Danny Miller
2011-10-09 10:49:07 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 12:40:25 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Ron Thompson
2011-10-09 13:08:49 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:09:43 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:13:43 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 13:55:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
556RECON
2011-10-09 14:17:13 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Rehmus
2011-10-09 14:55:34 UTC
Re: Maybe OT, reprap build started
Kevin Martin
2011-10-09 15:46:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Jon Elson
2011-10-09 17:26:27 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Jon Elson
2011-10-09 17:43:06 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Mike Payson
2011-10-09 18:38:32 UTC
Re: [CAD_CAM_EDM_DRO] REPRAP COST EFFECTIVE?
Low Compression
2011-10-09 19:50:13 UTC
Re: Maybe OT, reprap build started
Danny Miller
2011-10-09 20:55:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Mike Payson
2011-10-09 20:59:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-09 21:42:02 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-09 21:56:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-09 22:13:10 UTC
Re: Maybe OT, reprap build started
Danny Miller
2011-10-09 22:34:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-09 23:11:03 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-09 23:16:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Mike Payson
2011-10-09 23:46:08 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-10 01:02:15 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:23:47 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:24:21 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Kevin Martin
2011-10-10 07:31:56 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 10:28:24 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 10:31:17 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Alan
2011-10-10 10:35:37 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 11:21:40 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 11:34:26 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Alan
2011-10-10 12:08:57 UTC
RE: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 12:09:30 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-10 12:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 15:03:37 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 17:47:21 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-10 19:28:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-10 22:01:42 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Mike Payson
2011-10-10 22:19:49 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
David G. LeVine
2011-10-11 10:32:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-11 10:37:18 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
xoethosox
2011-10-11 14:39:15 UTC
Re: Maybe OT, reprap build started
Tom
2011-10-11 15:17:40 UTC
Re: Maybe OT, reprap build started [moderator is not asleep}
Mike Payson
2011-10-11 19:07:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Danny Miller
2011-10-12 00:20:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maybe OT, reprap build started
Phil@Y...
2011-10-12 16:25:06 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Phil@Y...
2011-10-13 08:18:35 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Les Newell
2011-10-13 08:47:41 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Lester Caine
2011-10-13 09:03:59 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Jon Elson
2011-10-13 09:52:36 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Dave Halliday
2011-10-13 16:06:11 UTC
OT - open source licencing
imserv1
2011-10-14 06:47:32 UTC
Re: OT - open source licencing
"hanermo" - CNC 6-axis Designs
2011-10-14 07:02:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT - open source licencing
David G. LeVine
2011-10-16 12:10:05 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
Danny Miller
2011-10-16 12:30:31 UTC
Re: [CAD_CAM_EDM_DRO] Maybe OT, reprap build started
robin
2011-10-16 17:17:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: OT - open source licencing